Superior ARCHED FACE KITS SDVI Installation Instructions

INSTALLATION INSTRUCTIONS fOR INSTALLING ARCHED
fACE KITS fOR USE wITH THE SDVI GAS fIREPLACE INSERT
KIT CONTENTS (See Figure 1):
Please ensure that all these parts are in one of the two boxes.
1 ea. Surround Kit
1 ea. Surround Trim Kit
1 ea. Face Kit
1 ea. Instruction Sheet
face / Surround Panel Kits
(Required) - Includes Black face, Surround, and Black Trim
Cat. No. Model
H7016 SDVI-A-BKN
H7015 SDVI-A-BRN
H7014 SDVI-A-B
Figure 1
TOOLS NEEDED:
Flat Bladed Screwdriver
Description
Arched Black Nickel face,
Surround (27" x 39"), and Black Trim
Arched Brushed Nickel face,
Surround (27" x 39"), and Black Trim
Arched Black face,
Surround (27" x 39"), and Black Trim
Surround
Arched face
Arched face
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
P/N 506033-03
Rev. NC, 03/2008
GENERAL INfORMATION
All of these parts may scratch and bend, great care should be used
in handling them.
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installa-
tion.
ALL wARNINGS AND PRECAUTIONS IN THE INSTALLATION AND
OPERATION MANUAL PROVIDED wITH THE APPLIANCE APPLY TO
THESE INSTRUCTIONS.
TURN Off THE fIREPLACE AND ALLOw IT TO COMPLETELY COOL
BEfORE PROCEEDING.
If you have a gold or nickel face kit, be sure to clean
it with a soft cloth and household glass cleaner
prior to burning the insert. fingerprints left on the
plated surfaces while burning will usually remain
on the finish permanently.
INSTALLATION INSTRUCTIONS
Surround Panels Installation
The SDVI insert surround panels are made of heavy gage steel for durability
and, if desired, for the ease of making an inside fit in the fireplace.
Step 1. Remove the speed nuts from the parts bag, supplied with the
insert (A in Figure 2) and install (with the flat surface forward)
on the six holes in the surround brackets - three on each side of
the insert (B in Figure 2). A flat bladed screwdriver may help in
installing the nuts.
HEARTH PRODUCTS
KITS AND ACCESSORIES
ARCHED fACE KITS
MODEL SDVI
IMPORTANT