Appendix M: Remote Viewing Using Internet Explorer - Digimerge Touch DH200 Series Instruction Manual

H.264 digital video recorder with touch sensitive control
Hide thumbs Also See for Touch DH200 Series:
Table of Contents

Advertisement

APPENDIX M: REMOTE VIEWING USING
Along with the DVR NetView remote client software, you can also view your system remotely using
Internet Explorer (version 7 or later recommended). Remote viewing through Internet Explorer
allows for viewing from up to three simultaneous connections.
NOTE: Remote viewing is only compatible with Internet Explorer. Mozilla Firefox, Opera, Safari
and other browsers are not supported.
To view your system using Internet Explorer:
1. Open Internet Explorer.
2. In the address bar, enter your system's IP address or your
Digimerge DDNS domain followed by :7000 — for example,
http://192.168.1.1:7000 or http://
tomsmith1.ddns.digimerge.net
NOTE: You MUST include http:// in order to access your system.
NOTE: If you need help finding your system's IP address, see "How
Do I Find My IP and MAC addresses?" on page 70.
3. Login with the user name admin, and your default system
password, 000000.
4. From the new page, click Web Viewer (Use overlay). You
will need to install ActiveX in order to access live viewing.
5. Click the warning bar and select Install ActiveX Control.
6. From the prompt, click Install. The page will refresh and
live viewing will commence.
Figure 46.4 Remote viewing through Internet Explorer (images simulated)
88
INTERNET EXPLORER
Figure 46.0 Login (admin/000000)
http://192.168.1.1:7000
Figure 46.1 Click Web Viewer (Use Overlay)
Figure 46.2 Install ActiveX
Figure 46.3 Click Install

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Touch dh200p series

Table of Contents