Digimerge Touch DH200 Series Instruction Manual page 87

Button Result/Action
• Set PRESET position; Spot Out on the remote control
• Move PTZ to a desired location
• Press the preset button
• Illuminate Custom 1
• Set the # for the Preset location
• Press ENTER to save and exit
• Go to the preset position; INFO on the remote control
• Press the GO button
• Enter the desired Preset # and press ENTER
• Start AUTO TOUR
• Press the Auto Tour button
• Press + and enter the range of preset and press ENTER
• For example, Auto Tour button, +5 will start the tour of 1~5
presets of the PTZ camera
• PTZ custom function 1; Display on the remote control
• PTZ custom function 2; Zoom on the remote control
• PTZ custom function 3; PTZ on the remote control
• Speed has 8 increments—keep pressing the buttons to
increase/decrease speed
Appendix D: Connecting PTZ Cameras
77