Using the Main Menu
DDNS
Configure Digimerge DDNS settings.
You must register for the FREE
NOTE:
Digimerge DDNS service prior to
configuring DDNS settings.
Figure 18.2 DDNS menu
To configure DDNS settings:
1. Under USE, select
2. Under DOMAIN NAME, enter only the first
portion of your DDNS domain from the
confirmation email. For example, if your
domain name is
tomsmith@digimerge.ddns.net, you only
tomsmith
need to enter
3. Under USER ID, enter your
.
user name
4. Under PASSWORD, enter your
.
DDNS password
Obtain your Digimerge DDNS user
NOTE:
name and password from the confirmation
email.
5. Under DDNS TEST, select
successful, you see "GOOD." If
unsuccessful, you will see "ERROR." If you
receive an error, please check your
network connections and carefully
re-enter your Digimerge DDNS
information.
6. Press
to save your settings. Press
ENTER
to close remaining windows.
CANCEL/ESC
You can also enter DDNS information
NOTE:
remotely using DVR NetView. For details,
see "Appendix C: Setting Up DDNS Service"
on page 72.
28
or
.
DIGIMERGE
OFF
in the text field.
Digimerge DDNS
Digimerge
. If
START
MISC
Configure additional network settings.
Figure 18.3 MISC menu
To configure bandwidth settings:
1. Under BANDWIDTH, select
,
,
KBPS
256 KBPS
512 KBPS
,
, or
4 MBPS
8 MBPS
By default, the system is set to
NOTE:
UNLIMITED. Change the bandwidth setting
to maximize your network performance.
2. Press
to save your settings. Press
ENTER
to close remaining windows
CANCEL/ESC
,
64 KBPS
128
,
,
1 MBPS
2 MBPS
.
UNLIMITED
,