Download Print this page
Craftsman 917.276410 Operator's Manual
Craftsman 917.276410 Operator's Manual

Craftsman 917.276410 Operator's Manual

18.5 hp, 42" mower electric start 6 speed transaxle

Advertisement

Available languages

Available languages

Quick Links

Operator's Manual
CRRFTSMI:IN °
LAWN TRACTOR
18.5 HP, 42" Mower
Electric Start
6 Speed
Transaxle
Model No.
917.276410 \ 276411
276412
• Espahol, p. 33
_]]
his product has a low emission engine which operates
differently
from previously
built engines. Before you start the
engine, read and understand
this Owner's Manual.
IMPORTANT:
Read and follow all Safety
Rules and Instructions before
operating this equipment.
For answers to your questions about
this product, Call:
1-800-659-5917
Sears Craftsman Help Line
5 am - 5 pm, Mon - Sat
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit our Craftsman
website:www.sears.com/craftsman

Advertisement

loading

Summary of Contents for Craftsman 917.276410

  • Page 1 Read and follow all Safety this product, Call: 1-800-659-5917 Rules and Instructions before Sears Craftsman Help Line operating this equipment. 5 am - 5 pm, Mon - Sat Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman...
  • Page 2: Limited Warranty

    Service andAdjustments...... 2 2 ProductSpecifications......6 Storage..........28 Assembly/Pre-Operation ......8 Troubleshooting ........29 Sears Service......B ack Cover Operation..........11 MaintenanceSchedule......1 7 LIMITED WARRANTY ON CRAFTSMAN TRACTOR AND BATTERY 2-YEAR ON TRACTOR When used and maintained according to the operator's manual...
  • Page 3: Operation

    DANGER:This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. • Never direct discharged material toward ,_WARNING: In order to prevent anyone. Avoid discharging material cidental starting...
  • Page 4 I1. SLOPE OPERATION • Never carry children, even with the blades shut off. They may fall off and Slopes are a major factor related to loss of be seriously injured or interfere with control and tip-over accidents, which can safe machine operation.
  • Page 5 • Keep machine free of grass, leaves, • Remove gas-powered equipment from other debris build-up. Clean oil or fuel the truck or trailer and refuel it on the spillage and remove any fuel-soaked ground. If this is not possible, then debris.
  • Page 6 (Gap: .030") AGREEMENTS Ground Speed Forward: Congratulations on making a smart pur- (MPH): chase. Your new Craftsman® product is designed and manufactured for years of dependable operation. But like all products, it may require repair from time to time. That's...
  • Page 7 Steering Wheel Steering (1) Large Flat Washer Wheel Insert © (1) 5/16 Lock Washer (1) Hex Bolt 5/16-18 x 4 Steering Extension Steering Wheel Adapter Shaft Boot Seat (1) Washer 17/32 x1-3/16 x12 Gauge ) Knob (1) Oil Drain Tube For Future Use Slope Sheet Keys...
  • Page 8 Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure...
  • Page 9 washer loosely.Do not tighten. NOTE: You may now roll or drive your 6. Lower seat into operatingpositionand tractor off the skid. Follow the appropriate sit in seat. instruction below to remove the tractor 7. Slide seat until a comfortableposition from the skid. is reachedwhich allowsyou to press WARNING: Before...
  • Page 10 CHECK TIRE PRESSURE #" CHECKLIST The tires on your tractor were overin- Before you operate and enjoy your new flated at the factory for shipping purposes. tractor, we wish to assure that you receive Correct tire pressure is important for best the best performance and satisfaction cutting...
  • Page 11 These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. REVERSE NEUTRAL HIGH CHOKE FAST SLOW IGNITION SWITCH ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE MOWER HEIGHT MOWER LIFT OPERATION SYSTEM (ROS) CLUTCH/BRAKE...
  • Page 12 KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations various controls and adjustments. Save this manual for future reference. Attachment "ON" Position Ignition Switch Clutch Lever Throttle/Choke Control...
  • Page 13 The operation of any tractor result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing adjustments or repairs. We recommend a wide vision safety mask over spectacles...
  • Page 14 USING THE REVERSE OPERATION • The average lawn should be cut to ap- SYSTEM proximately 2-1/2 inches during the cool season and to over 3 inches during 1. Depress clutch/brake pedal all the way months. For healthier and better looking down and hold.
  • Page 15: Cold Weather Starting

    TOWING CARTS AND OTHER ATTACH- CAUTION: Alcohol blended fuels (called MENTS gasohol or using ethanol or methanol) attract moisture which leads to separa- Tow only the attachments that are recom- tion and formation of acids during storage. mended by and comply with specifications Acidic gas can damage the fuel system...
  • Page 16 6. When engine starts, leave throttle control in choke position until engine warms up and begins to run roughly. Once rough running begins, imme- diately move the throttle control to the fast position. Engine warm-up take from several seconds to several minutes (the colder the temperature,...
  • Page 17: Before Each Use

    MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE EACH SEASON STORAGE SCHEDULE HOURS HOURS HOURS HOURS 2,heck Brake Operation 2,heck Tire Pressure 2,heck Operator Presence & ROS Systern_ Dheck for Loose Fasteners Dheck/Replace Mower Blades _ubrication Chart Dheck Battery Level Dlean Battery and Terminals...
  • Page 18: Brake Operation

    ROS "ON" Position TRACTOR Engine "ON" Position (Normal Operating) Alwaysobserve safety ruleswhen per- forming any maintenance. BRAKE OPERATION If tractor requiresmore than five (5) feetto stop at highest speed in highest gear on a level,dry concreteor paved surface,then brakemust be checked and adjusted.(See "TOADJUST BRAKE"in the Serviceand •...
  • Page 19 • The bladecan be sharpenedwith a file V-BELTS or on a grindingwheel. Do not attempt Check V-belts for deterioration and wear to sharpenwhile on the mower. after 100 hours of operation and replace • Tocheck blade balance,you will need a if necessary.
  • Page 20 Unlock drain valve by pushing inward slightly and turning counterclockwise. To open, pull out on the drain valve. Handle After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.
  • Page 21 MUFFLER CLEANING Inspect and replace corroded muffler • Clean engine, battery, seat, finish, etc. spark arrester (if equipped) as it could cre- of all foreign matter. ate a fire hazard and/or damage. • Keep finished surfaces and wheels free SPARK PLUG(S) of all gasoline, oil, etc.
  • Page 22 & WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING SERVICE OR ADJUSTMENTS: Depress clutch/brake pedal fully and set parking brake. Place gearshift lever in neutral (N) position. Place attachment clutch in "DISENGAGED" position. Turn ignition key to "STOP" and remove key. Make sure the blades and all moving parts have completely...
  • Page 23 LEVEL MOWER HOUSING • When distance "D" is 1/8" to 1/2" lower at front than rear, tighten nuts "F" Adjust the mower while tractor is parked on level ground or driveway. Make sure against trunnion on both front links. tires are properly inflated (See "PROD- •...
  • Page 24 Mandrel With Parking Brake "Engaged" Idler Pulleys Nut "A" Jam Nut Mandrel Pulley Operating TO CHECK AND ADJUST BRAKE Your tractor is equipped with an adjustable brake system which is mounted on the TO REPLACE MOTION DRIVE BELT right side of the transaxle. Park the tractor on level surface.
  • Page 25 TO REMOVE WHEEL FOR REPAIRS Engine Pulle Block up axle securely. Remove axle cover, retaining ring and Center washers to allow wheel removal (rear Clutching wheels have a square key - Do not Keeper lose). Repair tire and reassemble. NOTE: On rear wheels only: align...
  • Page 26 TO REPLACE HEADLIGHT BULB TO REMOVE CABLES, REVERSE ORDER 1. Raise hood. Pull bulb holder out of the hole in the BLACK cable first from chassis then from the fully charged battery. backside of the grill. RED cable last from both batteries. Replace bulb in holder and push bulb holder...
  • Page 27 ENGINE IMPORTANT: Damage to the needle valve and the seat in carburetor may result Maintenance, repair, or replacement of the if screw is turned in too tight. emission control devices and systems, which are being done at the customers expense, PRELIMINARY SETTING may be performed...
  • Page 28 Immediately prepare your tractor for stor- blended fuels (called gasohol or using age at the end of the season or if the trac- ethanol or methanol) can attract moisture tor will not be used for 30 days or more. which leads to separation and formation acids during...
  • Page 29: Troubleshooting

    TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION Will not start 1. Out of fuel. Fill fuel tank. See "TO START ENGINE" Engine not "CHOKED" properly. in Operation section. Wait several minutes Engine flooded.
  • Page 30 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION Loss of power Cutting too much grass/too Raise cutting height/reduce fast. speed. Throttle in "CHOKE" position. Adjust throttle control. Clean underside of mower Build-up of grass, leaves and trash under...
  • Page 31 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION Mower blades will 1. Remove obstruction. 1. Obstruction in clutch not rotate mechanism. Worn/damaged mower drive Replace mower drive belt. belt. Frozen idler pulley. Replace idler pulley.
  • Page 32 SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL 15 DEGREES MAX. down the face of slopes, never across the face. Do not mow WARNING: To avoid serious injury, operate your tractor up and slopes greater than 15 degrees.
  • Page 33 Usted podr_, evi- tarse el costo del vi_ttico si Ileva la bateria a un Centro de Servicios autorizado de Craftsman. Para saber cual le queda m_.s cerca, Ilame al 1-800-4-MY-HOME®.
  • Page 34 PELIGRO: Esta Maquina cortadora es capaz de amputar las manosy los pies y de lanzar objetos, si no se observan las instrucciones de seguridad siguientes se pueden producir lesiones graves o la muerte. A_,ADVERTENCIA: Siempre desconecte el • No hacer funcionar la m_.quina sin el alambre de la bujfa y p6ngalo donde no pueda captador de hierba entera, la protecci6n de entrar en contacto con la bujfa, para evitar el...
  • Page 35 • Escoger u navelocidad demarcha bajade • Nunca permitir que ni_os u otras personas modoquenoseanecesario pararse o cam- esten dentro del equipo por remolcar. biarestando enunapendiente. • En pendientes, el peso del equipo remolcado • Nocortarla hierbamojada. Lasruedas puede causar la p6rdida de tracci6n y la pueden perder tracci6n.
  • Page 36 • Las cuchillas del cortac_sped son afiladas. • Mantener la m_.quina libre de hierba, hojas Envolver la cuchilla, ponerse guantes y poner u otros residuos acumulados. Limpiar las la m_.xima atenci6n cuando se hacen opera- salpicaduras de aceite o carburante y quitar ciones en elias.
  • Page 37: Especificaciones

    REPARACION Velocidad de Marcha Hacia Adelante: Congratulaciones por su buena compra. Recarrido(MPH): Su nuevo producto Craftsman® est,. diseSado 2 n_ y fabricado para funcionar de modo fiable por 3 rd 4 th muchos aSos. Pero como todos los productos, puede necesitar alguna reparaci6n de tanto 5 th en tanto.
  • Page 38 Volante de direccion Inserto (1) Arandela volante direccion © (1) Arandela (1) Perno hexagonal seguridad 5/16 5/16-18 Eje de Extenci6n _,ccesorio de Adaptador transcion de la direccion Asiento (_(1) Arandela de calibre Manilla _,_ 17/32 x 1-3/16 x 12 Hoja de pendiente Llaves (2) Llaves...
  • Page 39 Su tractor nuevo ha side montado en la f_tbrica con la excepci6n de aquellas partes que no se han montado per razones de envio. Para asegurarse que su tractor funcione en forma adecuada y segura todas las partes y los articulos de ferreteria que se monten tienen que ser apretados en forma segura.
  • Page 40 Baje el asiento a la posici6n de operaci6n y sientese en el asiento. AVISO: Ahora puede rodar o conducir su trac- Deslice el asiento hasta que Ilegue a una tor fuera de la corredera. Siga las siguientes posici6n cdmoda, que le permita presionar instrucciones para remover el tractor de la el pedal del embrague/freno...
  • Page 41 REVISION PRESION REVISION DE LA DE LAS ,/LISTA ANTES DE OPERAR Y DE DISFRUTAR DE SU LLANTAS Las Ilantas en su tractor fueron infladas de- TRACTOR NUEVO, LE DESEAMOS QUE RE- CIBA EL MEJOR RENDIMIENTOY LA MAYOR masiado en la f_.brica por razones de envfo. La SATISFACCION DE ESTE PRODUCTO DE presi6n de las Ilantas correctas es importante...
  • Page 42 Estos simbolos pueden aparecer sobre su tractor o en la literatura proporcionada con el producto. Aprenda y comprenda sus significados. I'.,I MARCHA ATR,_,S NEUTRO ALTO BAJO ESTRANGU- R,_PIDO LENTO LACI6N MOTOR MOTOR MOTOR FRENO ALTURA DE LA LEVANTAMIENTO APAGADO SISTEMA ENCENDIDO EN MARCHA ESTACIONAMIENTO...
  • Page 43 FAMILIARICESE CON SU TRACTOR LEA ESTE MANUAL DEL DUEI_IO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Palanca del embrague ROS "ON"...
  • Page 44 La operaci6n de cualquier tractor puede hacer que salten objetos extrahos dentro de sus ojos, Io que puede producir daSos graves en _stos. Siempre use anteojos de seguridad o protecciones para los ojos mientras opere su tractor o cuando haga ajustes o reparaciones. Recomendamos el uso de la mascara de segu- ridad de visidn amplia, para uso sobre los espejuelos o anteojos de seguridad est_.ndar.
  • Page 45 USAR EL SISTEMA DE FUNCIONAMIENTO • El c6sped promedio debe cortarse aproximada- ATRAS - mente a 2-1/2 pulgadas durante la temporada fria y sobre 3 pulgadas durante los meses • Presionar el pedal embrague/freno hasta el calurosos. Para obtener un cesped m_.s salu- rondo y mantenerlo apretado.
  • Page 46 PRECAUClON: Combustibles mezclados con REMOLQUE DE CARRETILLAS O OTROS ACCESORIOS alcohol (conocidos como gasohol, o el uso de etanol o metanol) pueden atraer la humedad, Remolque solamente los accesorios reco- la que conduce a la separaci6n y formaci6n de mendados y especificados por el fabricante del tractor.
  • Page 47 ARRANQUE CON TIEMPO FR[O (50°Y MENOS) AI hacer arrancar el motor, mantenga el control de la aceleraci6n a la posici6n de estrangulaci6n hasta que el motor se caliente y empieze funcionar mal. Una vez que empieze a funcionar mal, mueva inme- diatamente el control de la aceleraci6n a la •...
  • Page 48: Antes De Cada Uso

    PROGRAMA DE ANTES CADA CADA CADA CADA CADA ALMACENAMIENTC CADA USO TEMPORADA MANTENIMIENTO HORAS HORAS HORAS HORAS Revisar la operaci6n del freno Revisar la presi6n de las Ilantas Verifiez la commande de presence d'operateur et le sistema d ROS v" Revisar si hay sujetadores sueltos Afilar/cambiar...
  • Page 49 • Cuando el motor ester en marcha con TRACTOR el interruptor de Ilave del sistema de Siempre observe las reglas de seguridad cu- ando de mantenimiento. funcionamiento atr_ts (ROS) en la posici6n "ON" y el embrague del accesorio conectado, OPERAClON DEL FRENO cualquier tentativa del operador de viajar Si el tractor exige m_.s de cinco (5) pies para...
  • Page 50 AVISO: No use un elavo para balancear la CALIDADES DE VISCOSIDAD DE SAE cuchilla. Los 16bulos del agujero central pueden aparecer como centrados, pero no Io est_.n. • Deslice la cuchilla en una parte no roscada del perno de acero o clavija y sujete el perno o la clavija paralelo al suelo.
  • Page 51 LIMPIEZA DE LA REJILLA DE AIRE Use un medidor en la tapa/varilla indicadora del nivel para relleno del aceite para revisar La rejilla de aire debe mantenerse sin mugre el nivel. Mantenga el aceite en la linea de y paja para evitar el daho al motor debido al Ileno (FULL) en la varilla indicadora de sobrecalentamiento.
  • Page 52 ADVERTENCIA:PARA EVITAR LESIONES SERIAS, ANTES DE DAR CUALQUIER SERVICIO O DE HACER AJUSTES: Presione el pedal del embrague/freno completamente y aplique el freno de estacionamiento. Ponga la palanca de cambios en la posici6n de neutro (N). Ponga el embrague del accesorio en la posici6n desenganchado (DISENGAGED).
  • Page 53 PARA NIVELAR LA CAJA DE LA SEGA- • Si los varillajes no tienen la misma Iongitud, DORA ajuste un varillaje a la misma Iongitud que el otto. Ajuste la segadora mientras que el tractor este estacionado en terreno nivelado o en la entrada •...
  • Page 54 PARA CAMBIAR LA CORREA DE IMPUL- Si la distancia es distinta que 1-1/2", suelte SION DE LA CUCHILLA SEGADORA la contratuerca y gire la tuerca "A" hasta que la distancia sea de 1-1/2". Vuelva a La correa de impulsi6n de la cuchilla segadora apretar la contratuerca en contra de la se puede cambiar sin herramientas.
  • Page 55 PARA HACER ARRANCAR EL MOTOR CON Cubierta Tuerca UNA BATERIA BAJA Terminal Perno _I_ADVERTENCIA: Las baterfas de _.cido-plo- "@. Hexagonal mo generan gases explosivos. Mantenga las chispas, las llamas y los materiales para fumar alejados de las baterfas. Siempre use una pro- tecci6n para los ojos alrededor de las baterfas.
  • Page 56 AJUSTE PRELIMINAR - MOTOR El mantenimiento, la reparaci6n, o el reemplazo El conjunto del filtro de aire tiene que mon- de cualquier dispositivos o sistemas del control terse en el carburador cuando se hagen los de la emisi6n, los cuales seen hechos al costo ajustes en este.
  • Page 57 Inmediatamente prepare su tractor para el etanol o metanol) pueden atraer humedad, Io almacenamiento al final de la temporada o si el que conduce a la separaci6n y a la formaci6n de acudos durante elalmacenamiento. tractor no se va a usar por 30 dias o m_.s. gasolina acidica puede dahar el sistema de _ADVERTENClA: Nunca almacene el trac-...
  • Page 58 IDENTIFICACION DE PROBLEMAS: Vea la seccion apropiada en el manual a menos que este dirigido a un centro de servicio Sears. PROBLEMA CAUSA CORRECCION No arranca 1. Sin combustible. Llene el estanque de combustible. 2. Motor sin la Vea "PARA ARRANCAR MOTOR"...
  • Page 59 IDENTIFICACION DE PROBLEMAS: Vea la seccion apropiada en el manual a menos que este dirigido a un centro de servicio Sears. CORRECCION PROBLEMA CAUSA Perdida de fuerza 3. Acumulaci6n de c_sped, hojas y 3. Limpie la parte inferior de la caja (continuado) basura debajo de la segadora.
  • Page 60 IDENTIFICACION DE PROBLEMAS: Vea la seccion apropiada en el manual a menos que este dirigido a un centro de servicio Sears. CAUSA PROBLEMA CORRECCION Las cuchillas 1. Obstrucci6n en el mecanismo 1. Remueva la obstrucci6n. segadoras no rotan del embrague. 2.
  • Page 63 GUiA SUGERIDA PARA MEDIR LAS PENDIENTES CON LA VISTA PARA UNA ,-.,... OPERACION SEGURA SOLAMENTE ANDE CUESTA ARRIBA O CUESTA ABAJO Y NO ATRAVIESE EL CERRO (.C) 15 GRADOS MAX. y abajo de las pendientes, nunca transversalmente con respecto alas DVERTENCIA: Para evitar dahos graves, haga funcionar su tractor arriba pendientes.
  • Page 64 Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter made it, no matter sold For the replacement parts, accessories owner's manuals that you need to do-it-yourself. For Sears professional installation...

This manual is also suitable for:

917.276411917.276412