Sending A Fax - Epson Stylus CX5800F Basic Manual

Sending a Fax

Before you fax, place your original document or photo on the document table
glass as described on page 9. Then send your fax by manually entering a fax
number, redialing the previous fax number, or selecting an entry from your speed
dial list.
Manually Entering or Redialing a Fax Number
1. Press the
Fax
button lights up and you see this display:
Fax
2. Press the keys on the numeric keypad to enter the
fax number. You can enter the numbers 0 to 9 and
the characters * and #; up to 64 digits total.
Note:
If you need to change a character to the left, press the l button to delete the
character and re-enter it. Press the r button if you need to move the cursor to the
right.
If you want to redial the last fax number you used, press the
button instead of entering a fax number. The last fax number appears on the
screen.
3. To send a black-and-white fax, press the x
To send a color fax, press the x
is set to
B&W Only
You see this display during faxing:
Note:
If you need to cancel faxing at any time, press the y Cancel/Back button.
4. After your original is scanned, you see this screen:
If you do not need to fax another page, press the
key (for No). The Epson Stylus CX5800F dials
2
the fax number and faxes your document.
Note:
If the fax number is busy or there is some other connection problem, you see an
error message and the Epson Stylus CX5800F returns to the first fax mode screen.
The Epson Stylus CX5800F redials the number after one minute. Wait for the
redial, or check your connection and settings and try faxing again.
button once to enter Fax mode. The
, the fax is sent in black and white. See page 34 for details.)
Start B&W
button. (If the Fax Mode setting
Start Color
Faxing a Photo or Document
Enter Fax Number
1234567890
Redial/Pause
button.
Scanning 001 98%
Send another pag
39