Installation Overview - Motorola DCX3501-M Installation Manual

High-definition dvr
Hide thumbs Also See for DCX3501-M:
Table of Contents

Advertisement

Installation

Installation Overview

1. Determine if you are connecting to a:
High-Definition
TV or monitor
Standard-
Definition TV
2. Determine if you are connecting the audio to a home theater receiver or directly to
the TV:
ο
For an HDMI or IEEE-1394 video connection, no additional audio connections to
the TV are required.
ο
If the receiver or TV has a digital audio (S/PDIF) input, use the digital audio optical
(s/pdif) or coaxial (s/pdif) outputs. Otherwise, use the baseband left and right
audio out outputs.
3. Locate the cabling diagram(s) that best match the subscriber's configuration.
4. Connect the audio and video cables in a manner matching that diagram.
5. Determine if you are connecting to a data device (see Data Device Connections). For
installation details, refer to the instructions included with the data device.
6. Connect the cable terminal to the coaxial cable wall outlet.
7. Perform the operational check for the remote control.
8. Optimize the High-Definition settings. See
Caption Settings
High-Definition DVR DCX3501-M • Installation Manual
365-095-16528-x.2
Use the component video (YPbPr), HDMI, or IEEE-1394 outputs. No
other video connection supports HDTV.
If the TV has a DVI input, connect a DVI-to-HDMI adapter or cable to
the HDMI out connector on the DCX set-top instead of the IEEE-
1394 connection and the DVI-HDTV connector on the TV.
Connect the S-Video connector using an S-video cable or connect
the composite video connector using a composite (RCA phono)
cable. If the TV only has a coaxial RF input, connect it to the
DCX3501-M RF OUT connector.
in this section.
Configuring Audio, Video, and Closed
B
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents