Sony LBT-GPX55 Operating Instructions Manual page 20

Transferring analog audio
(Analog Transfer)
You can transfer sound from an analog
audio source (other than CD, USB or
Bluetooth function) to a USB device.
Use the buttons on the unit to perform this
operation.
1
Connect a transferable USB
device to the
2
Press TUNER/BAND or AUDIO IN
repeatedly to select the source
you want to transfer.
3
Press REC TO USB B.
"PUSH ENTER" appears in the
display panel.
4
Press ENTER.
The transfer starts when "DON'T
REMOVE" appears in the display
panel.
5
Start playback the source.
To stop transferring
Press x.
To create a new MP3 file
Press REC TO USB B during Analog
Transfer.
"NEW TRACK" appears in the display
panel.
A new MP3 is also created automatically
after approximately 1 hour of transfer.
Notes
• When a new MP3 file is created, transfer is
disabled for the time being.
• If you press REC TO USB B again after a few
seconds, a new MP3 file can be created.
GB
20
B port (page 19).
Erasing audio files or folders
from the USB device
Use the buttons on the unit to perform this
operation.
1
Connect a USB device to the
or B port.
2
Press USB/USB SELECT
repeatedly until "USB A" or
"USB B" lights up in the display
panel when playback is stopped.
3
Press ./> or
repeatedly to select the audio
file or folder.
4
Press OPTIONS.
5
Press / to select "USB
ERASE", then press ENTER.
"FOLDER ERASE" or "TRACK
ERASE" appears in the display panel.
6
Press ENTER.
"COMPLETE" appears in the display
panel.
Folder and file generation
rules
When first transferring to a USB device, a
"MUSIC" folder is created directly below
the "ROOT" and a transfer mode-oriented
folder is created within the "MUSIC"
folder. Folders and files are generated
within any of the transfer mode-oriented
folders as follows.
Synchronized Transfer
Source Folder name
Audio files Same as the source
AUDIO CD "CDDA0001"* "TRACK001"*
A
+/–
File name