Usb Transfer; Transferring Music - Sony LBT-GPX55 Operating Instructions Manual

To cancel Program Play
When playback is stopped, press PLAY
MODE repeatedly until "PGM" disappear
from the display panel.
To delete the last step from the
program list
Press CLEAR when playback is stopped.
Notes
• (CD function only) The program list remains
available until you open the disc tray.
• (USB function only) The program list is
cleared when you:
– perform the erase operation.
– remove the USB device.
– switch the USB memory select.
Playing repeatedly (Repeat
Play)
Press REPEAT repeatedly.
• : repeat all tracks or audio files on a
folder/disc/USB device
• : repeat a track or audio file
Notes on the USB device
• The playback order for the system may differ
from the playback order of the connected
digital music player.
• You cannot erase audio files and folders in
Shuffle Play or Program Play.
GB
18

USB Transfer

Transferring music

You can transfer music from a sound
source to a USB device connected to the
B port.
The audio format of files transferred by
this system is MP3. However, you can
also transfer WMA and AAC files from
USB A.
Notes
• Do not remove the USB device during
transfer or erase operations. Doing so may
corrupt the data on the USB device or damage
the USB device itself.
• MP3/WMA/AAC files are transferred with
the same bit rate as the original files.
• When transferring from an AUDIO CD,
TUNER, TV/DVD/SAT or PC/GAME
function, you may select the bit rate before
transferring.
• USB transfer and erase operations are
disabled while the disc tray is open.
Note on copyright-protected
content
The transferred music is limited to private
use only. Use of the music beyond this
limit requires permission of the copyright
holders.
To select the playback source or
transferring destination (USB
memory select)
See page 15.
To select the bit rate
You can select a higher bit rate to transfer
music with better quality.
Use the buttons on the unit to perform this
operation.
1
Press OPTIONS.
2
Press / repeatedly to select
"REC BIT RATE", then press
ENTER.