Disc/Usb Playback; Playing A Disc; Before Using The Usb Device With This System - Sony LBT-GPX55 Operating Instructions Manual

Disc/USB Playback

Playing a disc

1
Press CD.
2
Press Z OPEN/CLOSE on the
unit.
3
Load a disc with the label side
facing up on the disc tray.
When you play
back an 8 cm
disc such as a
CD single, place
it on the inner
circle of the tray
4
Press Z OPEN/CLOSE on the
unit to close the disc tray.
Do not forcibly push the disc tray to
close it as this may cause a
malfunction.
5
Press N to start playback.
Before using the USB
device with this system
Check the websites for the information
about compatible USB devices (page 32).
To select the playback source or
transferring destination (USB
memory select)
If the USB device has more than one
memory (for example, internal memory
and a memory card), you can select which
memory to use as a playback source or
transferring destination.
Use the buttons on the unit to perform this
operation.
Note
You cannot select a memory during playback or
transfer. Make sure to select a memory before
starting playback or transfer.
1
Connect the USB device to the
or B port.
2
Press USB/USB SELECT
repeatedly until "USB A" or "USB B"
lights up in the display panel.
3
Press OPTIONS when playback is
stopped.
4
Press / to select "USB MEM
SEL", then press ENTER.
5
Press / to select the memory
you want, then press ENTER.
A
GB
15