Table of Contents
Advertisement
p
o
roduct
vervIeW
remote control
r
c
emote
ontrol
Remote Control Operation
The remote control is the secondary input device for navigating the system's
interface. In device operation, the enter key has the same function as "left
click" of the mouse.
I
f
d
tem
unctIon
escrIptIon
1
STANDBY
Press to turn standby mode ON/OFF
If "Security" has been enabled in the setup menu, press
2
LOGIN/LOCK
to open the user password login screen.
Number/Channel
While in menus, press buttons 0~9 to enter values; In
3
Buttons
Live View, press 1~4 to view channels in full-screen
Window
4
Press to show quad display
Display
5
MENU
Opens the main menu
6
PTZ
Press to open the PTZ control window
7
EXIT
Close menu windows
In menus, press to confirm selections; in PTZ mode,
press to change the navigation buttons to control the
connected PTZ camera (not included)
Press to move cursor up; in PTZ mode, press to pan
camera up
Navigation/
Press to move cursor down; in PTZ mode, press to pan
8
OK
camera down
Press to move cursor left; in PTZ mode, press to pan
camera left
Press to move cursor right; in PTZ mode, press to pan
camera right
9
+ / -
In menus, press to adjust values
10
RECORD
Press to start manual recording
11
STOP
Press to stop manual recording
12
EXTRA
For future use
Increase reverse playback speed 2X, 4X, 8X
Press to freeze playback to one frame, then press again
to advance frame-by-frame
Playback
13
Press to start playback
Controls
Press to slow playback speed by 1/2, 1/4, 1/8
Press to increase forward playback speed 2X, 4X, 8X
1
3
4
6
8
9
10
11
Remote Control
TIP: When using the remote
control to enter password
and camera titles, select the
field using the navigation
buttons, press ENTER, and then press the
number buttons.
Battery Replacement -
Instructions for Use
Always purchase the correct
size and grade of battery most
suitable for intended use. Re-
place all batteries of a set at
the same time. Clean the battery contacts
and also those of the device prior to battery
installation. Ensure the batteries are installed
correctly with regard to polarity (+ and -). Re-
move batteries from equipment that is not to
be used for an extended period of time. Re-
move used batteries promptly.
Page 10
m
c
ouse
ontrols
2
Mouse Operation with this DVR
he mouse is the primary input device for navigating system menus.
T
NOTE: Unless otherwise noted, all system functions described in
this manual are achieved through mouse input.
To use a mouse with the system:
Connect a USB mouse to the USB MOUSE port on back panel of the
5
system.
NOTE: Only the USB 2.0 port on the front panel is designed for data
7
backup to a USB flash drive. Do not connect a USB flash drive to
the USB MOUSE port or vice versa.
Use the mouse buttons to perform the following:
9
Left-Button:
1
• Click to select a menu option
• During live viewing in split-screen double-click on a channel
12
to view the selected channel in full-screen
• Double-click the channel again to return to split-screen view
13
• Selecting letter or number on the virtual keypad
Right-Button:
2
• Click to open the Quick Access Menu
• Exits any window
• Exits any menu or re-opens previous menu
Scroll-Wheel:
3
• Not used
v
k
Irtual
eypad
Virtual Keypad
To enter text or numerical data, the system uses a virtual
keypad. In fields where letters or numbers can be entered, you
can switch between various formats – numbers, upper case
(ABC) and lower case (abc) and Symbols. See below.
Numbers
p
roduct
mouse and virtual keypad
3
1
Letters-Uppercase
Letters-Lowercase
Page 11
o
vervIeW
DVR Back
Connect Mouse
DVR Front Face
Connect USB Drive
2
Mouse Button Operation
Symbols
Advertisement
Table of Contents
