Show Ssl; Set Ssl - Enterasys D2 D2G124-12P Cli Reference Manual

D-series ethernet switches
Table of Contents

Advertisement

Usage
It is good practice for security reasons to disable HTTP access on the switch when finished 
configuring with WebView, and then to only enable WebView on the switch when changes need 
to be made.
Example
This example shows how to disable WebView on the switch:
D2(rw)->set webview disable

show ssl

Use this command to display SSL status.
Syntax
show ssl
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display SSL status:
D2(rw)->show ssl
SSL status: Enabled

set ssl

Use this command to enable or disable the use of WebView over SSL port 443. By default, SSL is 
disabled on the switch. This command can also be used to reinitialize the hostkey that is used for 
encryption.
Syntax
set ssl {enabled | disabled | reinitialize | hostkey reinitialize}
Parameters
enabled | disabled
reinitialize
hostkey reinitialize
Defaults
None.
Enable or disable the ability to use WebView over SSL.
Stops and then restarts the SSL process.
Stops SSL, regenerates new keys, and then restarts SSL.
show ssl
D-Series CLI Reference 2-53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterasys d2 d2g124-12D2g124-12D2g124-12p

Table of Contents