Purpose; Commands; Show Snmp Persistmode - Enterasys D2 D2G124-12P Cli Reference Manual

show snmp persistmode

Purpose

To set and view the persistence mode for CLI configuration commands, manually save the
running configuration, view, manage, and execute configuration files and image files, and set and
view TFTP parameters.

Commands

For information about...
show snmp persistmode
set snmp persistmode
save config
dir
show file
show config
configure
copy
delete
show tftp settings
set tftp timeout
clear tftp timeout
set tftp retry
clear tftp retry
show snmp persistmode
Use this command to display the configuration persistence mode setting.
Syntax
show snmp persistmode
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Usage
By default, the mode is set to "auto save," which automatically saves configuration changes at
specific intervals. If the mode is set to "manual," configuration commands are never automatically
2-40 Basic Configuration
Refer to page...
2-40
2-41
2-41
2-42
2-43
2-44
2-45
2-45
2-46
2-46
2-47
2-47
2-48
2-48