Clear Eapol - Enterasys D2 D2G124-12P Cli Reference Manual

clear eapol

Parameters
enable | disable
auth‐mode
auto |
forced‐auth |
forced‐unauth
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Examples
This example shows how to enable EAPOL:
D2(su)->set eapol enable
This example shows how to enable EAPOL with forced authorized mode on port
D2(su)->set eapol auth-mode forced-auth ge.1.1
clear eapol
Use this command to globally clear the EAPOL authentication mode, or to clear settings for one or
more ports.
Syntax
clear eapol [auth-mode] [port-string]
Parameters
auth‐mode
port‐string
Defaults
If auth‐mode is not specified, all EAPOL settings will be cleared.
If port‐string is not specified, settings will be cleared for all ports.
15-18 Security Configuration
Enables or disables EAPOL.
Specifies the authentication mode as:
• auto ‐ Auto authorization mode. This is the default mode and will
forward frames according to the authentication state of the port. For
details on this mode, refer to Table
• forced‐auth ‐ Forced authorized mode, which disables authentication
on the port.
• forced‐unauth ‐ Forced unauthorized mode, which filters and discards
all frames received on the port.
Specifies the port(s) on which to set EAPOL parameters. For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 4‐1.
(Optional) Globally clears the EAPOL authentication mode.
Specifies the port(s) on which to clear EAPOL parameters. For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 4‐1.
15‐47.
ge .1.1: