Examples
This example shows how to display 802.1X status:
D2(su)->show dot1x
DOT1X is disabled.
This example shows how to display authentication diagnostics information for
D2(su)->show dot1x auth-diag ge.1.1
Port : 1
Enter Connecting:
EAP Logoffs While Connecting:
Enter Authenticating:
Success While Authenticating
Timeouts While Authenticating:
Fails While Authenticating:
ReAuths While Authenticating:
EAP Starts While Authenticating:
EAP logoff While Authenticating:
Backend Responses:
Backend Access Challenges:
Backend Others Requests To Supp:
Backend NonNak Responses From:
Backend Auth Successes:
Backend Auth Fails:
This example shows how to display authentication statistics for
D2(su)->show dot1x auth-stats ge.1.1
Port: 1
EAPOL Frames Rx:
EAPOL Frames Tx:
EAPOL Start Frames Rx:
EAPOL Logoff Frames Rx:
EAPOL RespId Frames Rx:
EAPOL Resp Frames Rx:
EAPOL Req Frames Tx:
EAP Length Error Frames Rx:
Last EAPOL Frame Version:
Last EAPOL Frame Source:
This example shows how to display the status of port reauthentication control for
ge
.1.6:
D2(su)->show dot1x port reauth ge.1.1-6
Port 1: Port reauthenticate:
Port 2: Port reauthenticate:
Port 3: Port reauthenticate:
Port 4: Port reauthenticate:
Port 5: Port reauthenticate:
Port 6: Port reauthenticate:
show dot1x auth-config
Use this command to display 802.1X authentication configuration settings for one or more ports.
Syntax
show dot1x auth-config [authcontrolled-portcontrol] [maxreq] [quietperiod]
[reauthenabled] [reauthperiod] [servertimeout] [supptimeout] [txperiod]
[port-string]
Auth-Diag
Auth-Stats
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
00:00:00:00:00:00
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
show dot1x auth-config
ge
.1.1:
ge
.1.1:
ge
.1.1 through
D-Series CLI Reference 15-11