Clear Dhcp Pool Dns-Server; Set Dhcp Pool Domain-Name - Enterasys D2 D2G124-12P Cli Reference Manual

D-series ethernet switches
Table of Contents

Advertisement

Syntax
set dhcp pool poolname dns-server address [address2 ... address8]
Parameters
poolname
address
address2 ... address8 
Defaults
None.
Mode
Switch command, read‐write.
Example
This example assigns a DNS server at 10.14.10.1 to the address pool "'auto1."
D2(rw)->set dhcp pool auto1 dns-server 10.14.10.1

clear dhcp pool dns-server

Use this command to remove the DNS server list from the address pool being configured.
Syntax
clear dhcp pool poolname dns-server
Parameters
poolname
Defaults
None.
Mode
Switch command, read‐write.
Example
This example removes the DNS server list from the address pool "auto1."
D2(rw)->clear dhcp pool auto1 dns-server

set dhcp pool domain-name

Use this command to specify a domain name to be assigned to DHCP clients served by the 
address pool being configured.
Specifies the name of the address pool. Pool names may be up to 31 
characters in length.
Specifies the IP address of a DNS server. 
(Optional) Specifies, in order of preference, up to 7 additional DNS 
server addresses.
Specifies the name of the address pool. Pool names may be up to 31 
characters in length.
clear dhcp pool dns-server
D-Series CLI Reference 14-23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterasys d2 d2g124-12D2g124-12D2g124-12p

Table of Contents