Set Logging Application; Show Logging Application Output Details - Enterasys D2 D2G124-12P Cli Reference Manual

D-series ethernet switches
Table of Contents

Advertisement

Example
This example shows how to display system logging information pertaining to the SNMP 
application.
D2(ro)->show logging application SNMP
Application
---------------------------------------------
90
1(emergencies)
4(errors)
7(information)
Table
12‐37 provides an explanation of the command output.
Table 12-37 show logging application Output Details
Output Field
Application
Current Severity Level

set logging application

Use this command to set the severity level of log messages for one or all applications.
Syntax
set logging application {[mnemonic | all]} [level level]
Parameters
mnemonic
all
Current Severity Level
SNMP
2(alerts)
5(warnings)
8(debugging)
Specifies a case sensitive mnemonic abbreviation of an application to be 
logged. This parameter will vary depending on the number and types of 
applications running on your system. To display a complete list, use the 
show logging application command as described in "show logging 
application" on page 12‐6. Sample mnemonics and their corresponding 
applications are listed in Table
Note: Mnemonic values are case sensitive and must be typed as they appear in
Table 12-38.
Sets the logging severity level for all applications.
6
3(critical)
6(notifications)
What it displays...
A mnemonic abbreviation of the textual description for
applications being logged.
Severity level at which the server is logging messages for the
listed application. This range (from 1 to 8) and its associated
severity list is shown in the CLI output. For a description of these
entries, which are set using the set logging application
command, refer to
"set logging
12‐38 on page 12‐8.
set logging application
application" on page 12-7.
D-Series CLI Reference 12-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterasys d2 d2g124-12D2g124-12D2g124-12p

Table of Contents