Chapter 11: Igmp Configuration; Igmp Overview; About Ip Multicast Group Management; About Multicasting - Enterasys D2 D2G124-12P Cli Reference Manual

D-series ethernet switches
Table of Contents

Advertisement

This chapter describes the IGMP Configuration set of commands and how to use them. 
For information about...

IGMP Overview

Configuring IGMP at Layer 2
IGMP Overview

About IP Multicast Group Management

The Internet Group Management Protocol (IGMP) runs between hosts and their immediately 
neighboring multicast device. The protocol's mechanisms allow a host to inform its local device 
that it wants to receive transmissions addressed to a specific multicast group.
A multicast‐enabled device can periodically ask its hosts if they want to receive multicast traffic. If 
there is more than one device on the LAN performing IP multicasting, one of these devices is 
elected "querier" and assumes the responsibility of querying the LAN for group members.
Based on the group membership information learned from IGMP, a device can determine which 
(if any) multicast traffic needs to be forwarded to each of its ports. At Layer‐3, multicast devices 
use this information, along with a multicast routing protocol, to support IP multicasting across an 
IP network.
IGMP provides the final step in an IP multicast packet delivery service, since it is only concerned 
with forwarding multicast traffic from the local device to group members on a directly attached 
subnetwork or LAN segment.
This device supports IP multicast group management by passively snooping on the IGMP query 
and IGMP report packets transferred between IP multicast devices and IP multicast host groups to 
learn IP multicast group members.
The purpose of IP multicast group management is to optimize a switched network's performance 
so multicast packets will only be forwarded to those ports containing multicast group hosts or 
multicast devices instead of flooding to all ports in the subnet (VLAN).

About Multicasting

Multicasting is used to support real‐time applications such as video conferences or streaming 
audio. A multicast server does not have to establish a separate connection with each client. It 
merely broadcasts its service to the network, and any hosts that want to receive the multicast 
register with their local multicast switch/router. Although this approach reduces the network 
overhead required by a multicast server, the broadcast traffic must be carefully pruned at every 
IGMP Configuration
D-Series CLI Reference 11-1
11
Refer to page...
11-1
11-2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterasys d2 d2g124-12D2g124-12D2g124-12p

Table of Contents