Clear Cos Port-Config - Enterasys D2 D2G124-12P Cli Reference Manual

clear cos port-config

Inbound Rate Limiting Port Configuration Entries
----------------------------------------------------------------------
Port Group Name
Port Group
Port Type
Assigned Ports
----------------------------------------------------------------------
Port Group Name
Port Group
Port Type
Assigned Ports
----------------------------------------------------------------------
Port Group Name
Port Group
Port Type
Assigned Ports
----------------------------------------------------------------------
clear cos port-config
Use this command to clear inbound rate limiting groups or assigned ports.
Syntax
clear cos port-config irl {all | group-type-index {[entry] | [name] [ports]}}
Parameters
irl
all
group‐type‐index
entry
name
ports
Defaults
None.
Mode
Switch command, read‐write.
Usage
The default port group 0.0 cannot be deleted.
9-24 Policy Classification Configuration
:Default
:0
:0
:none
:Users
:1
:0
:ge.1.1-46
:Uplink
:2
:0
:ge.1.47-48
Clear an IRL port group configuration.
Clear all inbound rate limiting port‐config non‐default entries.
Delete a specific port group or group name, or clear the ports from that
group. Valid entries are in the form of group#.port‐type.
Valid values for group# can range from 0 to 7. Valid values for port‐type
can range from 0 to 1, although only port type 0 is currently supported.
For example, port group 3 would be specified as 3.0.
Delete this non‐default inbound rate limiter entry.
Clear the administratively assigned textual description of this port group
entry to its default.
Clear the ports assigned to this group to its default.