Clear Policy Rule - Enterasys D2 D2G124-12P Cli Reference Manual

D-series ethernet switches
Table of Contents

Advertisement

clear policy rule

Table 9-35 Valid Values for Policy Classification Rules (Continued)
Classification Rule Parameter
Destination or Source UDP port:
udpsourceport
udpdestport
vlantag
Examples
This example shows how to use Table
Ethernet II Type 1526 frames to VLAN 7:
D2(su)->set policy rule 3 ether 1526 vlan 7
This example shows how to use Table
UDP frames from source port 45:
D2(su)->set policy rule 5 udpportsource 45 forward
This example shows how to use Table
source traffic from IP address 1.2.3.4. If mask 32 is not specified as shown, a default mask of 48 bits 
(IP address + port) would be applied:
D2(su)->set policy rule 1 ipsourcesocket 1.2.3.4 mask 32 drop
clear policy rule
Use this command to delete policy classification rule entries.
Syntax
This command has two forms of syntax—one to clear an admin rule (for policy ID 0), and the 
other to clear a classification rule.
clear policy rule admin-profile {vlantag data [mask mask]
clear policy rule profile-index {all-pid-entries | {ether |
ipdestsocket| ipsourcesocket | iptos | macdest | macsource | tcpdestport |
tcpsourceport | udpdestport | udpsourceport}}
Parameters
The following parameters apply to deleting an admin rule.
admin‐profile
vlantag data
mask mask
The following parameters apply to deleting a classification rule.
9-12 Policy Classification Configuration
data value
UDP Port Number:
0 - 65535 or 0 - 0xFFFF
VLAN tag: 1- 4094
9‐35 to assign a rule to policy profile 3 that will filter 
9‐35 to assign a rule to policy profile 5 that will forward 
9‐35 to assign a rule to policy profile 1 that will drop IP 
Specifies that the rule to be deleted is an admin rule for policy ID 0.
Deletes the rule based on VLAN tag specified by data. Value of data can 
range from 1 to 4094 or 0xFFF.
(Optional) Specifies the number of significant bits to match, dependent 
on the data value entered. Value of mask can range from 1 to 12. 
Refer to Table
9‐35 for valid values for each classification type and data 
value. 
mask bits
1 - 16
1 -12
ipproto|

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterasys d2 d2g124-12D2g124-12D2g124-12p

Table of Contents