set diffserv service
Parameters
summary
detailed port‐string
in
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display a detailed incoming traffic statistics about service port ge.1.1:
D2(rw)->show diffserv service stats detailed ge.1.1 in
Interface...................................... ge.1.1
Direction...................................... In
Operational Status............................. Up
Policy Name.................................... admin
Class Name..................................... system
In Discarded Packets........................... 0
set diffserv service
Use this command to add or remove a Diffserv policy to incoming traffic on one or more ports.
Syntax
set diffserv service {add | remove} {in} port-string policyname
Parameters
add | remove
in
port‐string
policyname
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to apply the Diffserv policy named "admin" to incoming traffic on ports
ge1.1‐10:
D2(rw)->set diffserv service add in ge.1.5 admin
8-16 Differentiated Services Configuration
Displays Diffserv a summary of service statistics.
Displays detailed statistics for a specific port.
Displays information about incoming traffic.
Adds or removes the specified policy.
Adds or removes the specified policy to incoming traffic.
Specifies the port(s) to which this policy configuration will be applied.
Specifies the policy name to be added to or removed from port traffic.