Show Port Trap; Set Port Trap - Enterasys D2 D2G124-12P Cli Reference Manual

D-series ethernet switches
Table of Contents

Advertisement

show port trap

For information about...
clear linkflap action
set linkflap threshold
set linkflap downtime
clear linkflap down
clear linkflap
show port trap
Use this command to display whether the port is enabled for generating an SNMP trap message if 
its link state changes.
Syntax
show port trap [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, the trap status for all ports will be displayed.
Mode
Switch command, read‐write.
Example
This example shows how to display link trap status for 
D2(su)->show port trap ge.3.1-4
Link traps enabled on port ge.3.1.
Link traps enabled on port ge.3.2.
Link traps enabled on port ge.3.3.
Link traps enabled on port ge.3.4.

set port trap

Use this command to enable of disable ports for sending SNMP trap messages when their link 
status changes.
Syntax
set port trap port-string {enable | disable}
4-20 Port Configuration
(Optional) Displays link trap status for specific port(s). For a detailed 
description of possible port‐string values, refer to "Port String Syntax Used 
in the CLI" on page 4‐1.
Refer to page...
ge
.3.1 through 4:
4-25
4-26
4-27
4-27
4-28

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterasys d2 d2g124-12D2g124-12D2g124-12p

Table of Contents