Table 3-10 show ciscodp port info Output Details (Continued)
Output Field
trusted
cos
set ciscodp status
Use this command to enable or disable the Cisco discovery protocol globally on the switch.
Syntax
set ciscodp state {auto | disable | enable}
Parameters
auto
disable
enable
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to globally enable CiscoDP:
D2(su)->set ciscodp state enable
set ciscodp timer
Use this command to set the number of seconds between Cisco discovery protocol PDU
transmissions.
Syntax
set ciscodp timer seconds
Parameters
seconds
Defaults
None.
What It Displays...
The trust mode of the port. Default of trusted can be changed using the set ciscodp
port command.
The Class of Service priority value for untrusted traffic. The default of 0 can be
changed using the set ciscodp port command.
Globally enable only if Cisco DP PDUs are received.
Globally disable Cisco discovery protocol.
Globally enable Cisco discovery protocol.
Specifies the number of seconds between Cisco DP PDU transmissions.
Valid values are from 5 to 254 seconds.
set ciscodp status
D-Series CLI Reference 3-9