Table of Contents
Advertisement
Evolution MK-425C/449C/461C Advanced User Guide
Assigning RPN/NRPN To A Fader/Rotary Controller
Note: For a detailed description of RPN/NRPN data see section RPN/NRPN's
Explained on page 12.
1.
Select the desired control as described earlier.
2.
Press "CONTROL ASSIGN" twice and while the display is
flashing, enter controller 132 for RPN coarse, 133 for RPN
fine, 134 for NRPN coarse or 135 for NRPN fine.
3.
Press "DATA MSB" twice to assign the number for
the RPN/NRPN MSB.
4.
Press DATA LSB twice to assign the number for
RPN/NRPN LSB.
5.
Press "CHANNEL ASSIGN" to assign the MIDI channel the
message should be sent on.
You will find most data sheets for synths that make use of NRPN's will give the MSB
and LSB values that you should enter into DATA MSB and DATA LSB banks (also see
Appendix F). However, some manuals may only give the hex values.
The MK-425C/449C/461C requires you to enter the decimal value. You can easily
convert hexadecimal values to decimal using the windows calculator. Simply select
Scientific mode, select hex and enter the hexadecimal value you need to convert.
Press the Dec button to convert it to a decimal value.
Alternatively, use the look up table in Appendix C.
8
Hide quick links:
Advertisement
Table of Contents
