Related Manuals for Ariens 936041 42" Hydro Tractor
Summary of Contents for Ariens 936041 42" Hydro Tractor
- Page 1 YDRO TRACTO Operator Manual Models 936041 42" Hydro Tractor 424621 Rev. 3 07.10.09 _ ENGL,SH Printed in USA...
-
Page 2: Safety Rules
SAFETY RULES & Safe Operation Practices for Ride=On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OFAMPUTATING HANDS AND FEETAND THROWING OBJECTS. FAILURETO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Do not operate machine without the entire grass catcher, discharge guard, or other safety devices in place and WARNING: In order to prevent acci=... - Page 3 SAFETY RULES & Safe Operation Practices for Ride=On Mowers ill. CHILDREN GENERAL SERVICE Tragic accidents can occur if the operator is not alert to • Never operate machine in a closed area. the presence of children. Children are often attracted to •...
-
Page 4: Product Specifications
PRODUCT SPECiFiCATiONS CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance. Gasoline Capacity 1.50 Gallons and Type: Unleaded Regular Should you experience any problem you can not easily rem- edy, please contact your nearest authorized service center/ Oil Type (API-SG-SL): SAE 30 (above 32°F) - Page 5 PARTS Steering Wheel Steering (1) Large Flat Washer Wheel Insert (1) 5/16 Lock Washer (1) Hex Bolt 5/16=18 x 4 Steering Steering Wheel Extension Steering Shaft Adapter Boot Seat (1) Washer Knob _(1) (1) Seat (1) Oil Drain Tube For Future Use Slope Sheet Keys (2) Keys...
- Page 6 ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.
- Page 7 ASSEMBLY CHECKFORPROPERPOSITIONOFALLBELTS • Pivot seat and pan forward and assemble adjustment knob and flat washer loosely. Do not tighten. See the figures that are shown for replacing motion and Lower seat into operating position and sit in seat. mower blade drive belts in the Service and Adjustments sec- tion of this manual.
-
Page 8: Operation
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. REVERSE NEUTRAL HiGH CHOKE FAST SLOW iGNiTiON SWITCH o, I ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE PARKING BRAKE PARKING BRAKE OPERATION LOCKED... -
Page 9: Know Your Tractor
OPERATION KNOW YOUR TRACTOR READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. LIGHT TH ROTTLE/CHOKE CONTROL ATTACHMENT CLUTCH/BRAKE... - Page 10 OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spec= tacles or standard safety glasses.
- Page 11 OPERATION TO ADJUST MOWER CUTTING HEIGHT REVERSE OPERATION SYSTEM (ROS) (See Fig. 9) Fig 11) (See The position of the attachment lift lever (A) determines the Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse cutting height.
-
Page 12: Before Starting The Engine
OPERATION TO OPERATE MOWER • Check engine oil with tractor on level ground. • Remove oil fill cap/dipstick and wipe clean, reinsert the Your tractor is equipped with an operator presence sensing dipstick and screw cap tight, wait for a few seconds, switch. -
Page 13: Mowing Tips
OPERATION Move motion control lever to neutral position. Shut- off WARM WEATHER STARTING (50°F/10°C and above) engine and set parking brake. • When engine starts, move the throttle control to the fast position. Engage transmission by placing freewheel control in engaged position (See "TO TRANSPORT"... -
Page 14: Maintenance Schedule
MAINTENANCE MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE EACH SEASON STORAGE SCHEDULE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure Presence & ROS Check Operator Systems Check for Loose Fasteners Mower Blades Check/Replace Lubrication Chart Level Check Battery and Terminals Clean... -
Page 15: Blade Care
MAINTENANCE TRACTOR BLADE CARE For best results mower blades must be kept sharp. Replace Always observe safety rules when performing any main- tenance. bent or damaged blades. BRAKE OPERATION proved by the man ufactu rer of you r tractor. If tractor requires more than five (5) feet to stop at highest Using a blade not approved by the manu= CAUTION: Use onlya replacement bladeap= speed in highest gear on a level, dry concrete or paved... - Page 16 MAINTENANCE V=BELTS • Ensure tractor is on level surface. Check V-belts for deterioration and wear after 100 hours • Oil will drain more freely when warm. • Catch oil in a suitable container. of operation and replace if necessary. The belts are not adjustable.
- Page 17 MAINTENANCE AiR FILTER Your engine will not run properly using a dirty air filter. Service air cleaner more often under dusty conditions. See Engine Manual. ENGINE OIL FILTER Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year.
-
Page 18: Service And Adjustments
SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS iNJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: Depress brake pedal fully and set parking brake. Place motion control lever in neutral position. Place attachment clutch in "DISENGAGED" position. Turn ignition key to "STOP" and remove key. Ensure the blades and all moving parts have completely stopped. - Page 19 SERVICE AND ADJUSTMENTS • ATTACH MOWER SIDE SUSPENSION ARMS (A) TO • Insert end of link (E) into hole in front mower bracket CHASSIS - Position hole in arm over pin (B) on outside and secure with washer and retainer spring (J). of tractor chassis and secure with retainer spring.
- Page 20 SERVICE AND ADJUSTMENTS TO LEVEL MOWER • If adjustment is necessary, see step in Visual Adjust- ment instructions above. Ensure tires are properly inflated to the PSI shown on tires. • Recheck measurements, adjust if necessary until both If tires are over or under inflated, it may affect the appear- sides are equal.
- Page 21 SERVICE AND ADJUSTMENTS TO REPLACE MOTION DRIVE BELT TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 30) (See Fig. 31) Park the tractor on level surface. Engage parking brake. The mower blade drive belt may be replaced without tools. For assistance, there is a belt installation guide decal on Park the tractor on level surface.
- Page 22 SERVICE AND ADJUSTMENTS TRANSAXLE MOTION CONTROL LEVER WASHERS NEUTRAL ADJUSTMENT Fig. 32) (See RETAINING RING The motion control lever has been preset at the factory and adjustment should not be necessary. AXLE. • Loosen adjustment bolt in front of the right rear wheel, COVER_ and lightly tighten.
- Page 23 SERVICE AND ADJUSTMENTS TO REPLACE FUSE REPLACING BATTERY (See Fig. 35) Replace with 20 amp automotive-type plug-in fuse. The WARNING: Do not short battery termi- fuse holder is located behind the dash. nals by allowing a wrench or any other object to contact both terminals at the TO REMOVE...
- Page 24 STORAGE ENGINE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANTTO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUELSYSTEM PARTS SUCH gasoline in the tank inside a building AS CARBURETOR,...
- Page 25 TROU OOTI G POI PROBLEM CAUSE CORRECTION 1. Out of fuel. Fill fuel tank. Will not start Engine not "CHOKED" properly. See "TO START ENGINE" in Operation section. Engine flooded. Wait several minutes before attempting to start. Bad spark plug. Replace spark plug.
- Page 26 BLESHOOTING POINTS PROBLEM CAUSE CORRECTION Engine continues Faulty operator-safety presence control Check wiring, switches and connections. If not corrected, contact an authorized service center/ system. to run when oper= department. ator [eaves seat with attachment clutch engaged 1. Worn, bent or loose blade. Replace blade.
- Page 27 SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL 15 DEGREES MAX. down the face of slopes, never across the face. Do not mow WARNING: To avoid serious injury, operate your tractor up and slopes greater...
- Page 28 Transport the product to a_d from the place d warranty, service. Have the warranty service performed by an authorized Ariees service representative To find an Ariens aathodzed sewice representative_ cor_tact Ariens at: 655 W Ryan Stree¢ Briliion W} 54110...
- Page 29 Engines and engine accessories are covered only by the engine man_facturer s warranty and are not covered by this warranty. PaNs tha_ are not genuine Ariens service pans ere not covered by this warranty_ The foUiowing maintenance, service and replacement...
- Page 30 Ariens Company 655 West Ryan Street Brillion, Wl 54110-1072 800-317-5898 www.ariens.com _IL WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.