Page 1
Agri-Fab ® OWNERS MANUAL Model No. 45-0354 GRADER BLADE CAUTION Read Rules for Safe Operation and Instructions Carefully • Safety • Assembly • Operation • Maintenance • Parts SpeedEPart the fastest way to purchase parts www.speedepart.com PRINTED IN USA FORM NO. 48976...
SAFETY RULES Remember, any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using power equipment. CAUTION: VEHICLE BRAKING IMPORTANT SAFETY PRECAUTIONS. ADDITION OF AN ACCESSORY OR AN MEANS - ATTENTION!
Page 3
PARTS PACKAGE CONTENTS - PARTS SHOWN ACTUAL SIZE QTY. DESCRIPTION QTY. DESCRIPTION Hex Bolt, 1/2" x 4" Lg. Hex Nut, Slotted, 1" Hex Bolt, 1/2" x 3-1/2" Lg. Hex Nut, Nylock, 1/2" Cotter Carriage Bolt, 3/8" x 1" Lg. Pivot Pin Lock Washer, 7/8"...
Page 4
ASSEMBLY Turn the mast assembly so that the cross brace is at the bottom and the hole in the side of the mast assembly is close to the bottom. Place the mast assembly onto the threaded stud on the blade TOOLS REQUIRED FOR ASSEMBLY...
Page 5
Attach the mast support to the hole in the mast Attach two mast sides to the mast support using a assembly just in front of the threaded stud. Use a 1/2" x 3-1/2" hex bolt and 1/2" Nylock hex nut. Use 1/2"...
Lock the blade assembly to the mast assembly The blade can be set to push or pull dirt, with three installing a pivot pin at the rear of the mast assem- grading angle settings in both the forward reverse positions. Do not use the reverse position bly.
Page 7
REPAIR PARTS FOR MODEL NO. 45-0354 GRADER BLADE REF. PART QTY. DESCRIPTION REF. PART QTY. DESCRIPTION Mast Brace 48979 Category 1 Pin 25157 25158 Mast Side 64779 Mast Assembly 46526 Cotter Pin, 3/16" x 2" Hex Bolt, 1/2" x 3-1/2" Lg. 46855 43343 Haircotter...
Page 8
SpeedEPart _ _ _ to _ REPAIR PARTS Agri-Fab, Inc. 303 West Raymond Sullivan, IL. 61951 217-728-8388 www.agri-fab.com...