3M Designjet H35000 - Commercial Printer Material Safety Data Sheet
Thinner
Hide thumbs
Also See for Designjet H35000 - Commercial Printer:
- Material safety data sheet (8 pages)
Advertisement
Quick Links
3M MATERIAL SAFETY DATA SHEET 3M(TM) Thinner CGS-80
Material Safety Data Sheet
Copyright, 2005, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: 3M(TM) Thinner CGS-80
MANUFACTURER: 3M
DIVISION: Commercial Graphics
ADDRESS: 3M Center
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 10/21/2005
Supercedes Date: 02/20/2004
Document Group: 11-0346-4
Product Use:
Specific Use:
SECTION 2: INGREDIENTS
Ingredient
DIETHYLENE GLYCOL MONOETHYL ETHER ACETATE
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Liquid
Odor, Color, Grade: Solvent Odor, Clear Color
General Physical Form: Liquid
Immediate health, physical, and environmental hazards:
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Mild Eye Irritation: Signs/symptoms may include redness, pain, and tearing.
Skin Contact:
_________________________________________________________________________________________________
St. Paul, MN 55144-1000
Solvent for Cleaning and Thinning
10/21/2005
C.A.S. No.
112-15-2
May cause target organ effects.
% by Wt
100
Page
1 of 7
Advertisement
Related Manuals for 3M Designjet H35000 - Commercial Printer
Summary of Contents for 3M Designjet H35000 - Commercial Printer
-
Page 1: Material Safety Data Sheet
3M MATERIAL SAFETY DATA SHEET 3M(TM) Thinner CGS-80 10/21/2005 Material Safety Data Sheet Copyright, 2005, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. -
Page 2: Section 4: First Aid Measures
3M MATERIAL SAFETY DATA SHEET 3M(TM) Thinner CGS-80 10/21/2005 Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and itching. Inhalation: Upper Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. May be absorbed following inhalation and cause target organ effects. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting. -
Page 3: Section 6: Accidental Release Measures
3M MATERIAL SAFETY DATA SHEET 3M(TM) Thinner CGS-80 10/21/2005 5.2 EXTINGUISHING MEDIA Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam). 5.3 PROTECTION OF FIRE FIGHTERS Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). -
Page 4: Section 9: Physical And Chemical Properties
3M MATERIAL SAFETY DATA SHEET 3M(TM) Thinner CGS-80 10/21/2005 8.2.2 Skin Protection Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Butyl Rubber. - Page 5 3M MATERIAL SAFETY DATA SHEET 3M(TM) Thinner CGS-80 10/21/2005 Hazardous Polymerization: Hazardous polymerization will not occur. Hazardous Decomposition or By-Products Substance Condition Carbon monoxide Not Specified Carbon dioxide Not Specified SECTION 11: TOXICOLOGICAL INFORMATION Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components.
-
Page 6: Section 16: Other Information
3M MATERIAL SAFETY DATA SHEET 3M(TM) Thinner CGS-80 10/21/2005 311/312 Hazard Categories: Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. - Page 7 3M MATERIAL SAFETY DATA SHEET 3M(TM) Thinner CGS-80 10/21/2005 Section 16: NFPA hazard classification heading was modified. Section 3: Other potential health effects heading was modified. Copyright was modified. Section 7: Handling information was modified. Section 7: Storage information was modified. Section 8: Engineering controls information was modified.