Download Print this page

Guv Tmvac Description; Grounding Instructions - Hoover GUV Garage Utility Vac Owner's Manual

Advertisement

Operate cleaning system only at
voltage specified on power unit.
This system is intended for resi-
dential use.
This system is designed for dry
pick-up only.
Grounding
Instructions
This appliance
must be grounded.
If it
should malfunction or breakdown,
grounding
provides a path of least
resistance for electrical
current to
reduce the risk of electric shock.
This
appliance
is equipped with a cord hav-
ing an equipment-grounding
conductor
(A) and grounding
plug (B). The plug
must be plugged into an appropriate
outlet (C) that is properly installed and
grounded in accordance
with all local
codes and ordinances.
Description
uu
DANGER-
Improper connection of the equipment-
grounding
conductor
can result in the
risk of electric shock.
Check with a
qualified electrician
or service person if
you are in doubt as to whether the outlet
is properly grounded.
Do not modify
the plug provided with the appliance
-
if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
This appliance
is for use on a nominal
120 volt circuit and has a grounding
plug that looks like the plug illustrated in
Fig. 1-1.
A Temporary adapter (D) may be used
to connect this plug to a 2-pole recepta-
cle (E) if a properly grounded outlet is
not available.
The Temporary adapter
should be used only until a properly
grounded outlet (C) can be installed by
a qualified electrician.
The green col-
ored rigid ear (F), lug, or the like extend-
ing from the adapter must be connected
to a permanent ground such as a prop-
erly grounded outlet box cover.
Whenever the adapter is used, it must
be held in place by a metal screw (G).
i&l
B
III
l_i
fl
l\
m
i
C
F
G
E
NOTE: In Canada, the use of a tempo-
rary adapter is Not Permitted by the
Canadian Electrical Code.
1. Motor module
2. Motor exhaust (back of unit)
3. Hose inlet
4. Dirt container (contains
Mounting bracket - Fig. 2-1
and tools - Fig. 3-2)
5. ON-OFF switch
6. Power cord (back of unit)
7. Data label
8. Mounting bracket
(packed inside dirt container)
9. Hose rack
10. Tools
11. Tool caddy
12. Hose
10
lq
J
)
11
12
t

Advertisement

loading