Download Print this page

Sony SPK-HCF Preparation Manual

Sports pack

Advertisement

Available languages

Available languages

Quick Links

4-170-776-01(1)
Sports Pack Preparation Guide
Guide de préparation du caisson sport
SPK-HCF
© 2010 Sony Corporation Printed in Japan
D
F
G
H
I-2
J
K
L
1
2
1
4
5
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Guide
Camera mounting shoe
Guide
Sabot de montage de caméra
Body
Corps
1
MC
ND
2
3
4
HDR-UX20/UX19/UX10/UX9,
DCR-DVD910/DVD708/DVD608/DVD510/
DVD308/DVD306/DVD109/DVD108/
M30
43
DVD106,
DCR-HC62/HC54/HC53/HC52/HC51/
HC48/HC47/HC45/HC38/HC37
HDR-XR155/XR150,
HDR-CX120/CX106/CX105/CX100,
30
47
DCR-SR87/SR77/SR67/SR57/SR48/SR47/
SR38/SR37
DCR-DVD850/DVD810/DVD710/DVD650/
DVD610/DVD450/DVD410/DVD310/
(M30
50)
DVD150/DVD115/DVD110,
DCR-SR88/SR78/SR68/SR58
HDR-XR350V/XR350,
(M30
58)
DCR-SR85/SR75/SR65/SR55/SR46/SR45/
SR36/SR35
HDR-XR200V/XR200/XR106/XR105/XR101/
XR100,
M30
62
HDR-SR10,
DCR-SR220/SR210
HDR-XR550V/XR550/XR520V/XR520/
XR500V/XR500,
M37
55
HDR-SR12/SR11/SR8/SR7/SR5,
HDR-HC9/HC7/HC5,
HDR-CX550V/CX550/CX12/CX11/CX7/CX6
DCR-SX60/SX50/SX41/SX40/SX31/SX30
5
6
1
HDR-HC9/HC7/HC5
1
DCR-DVD708/DVD608/DVD308/DVD306/
DVD109/DVD108/DVD106
D
DCR-HC62/HC54/HC53/HC52/HC51/HC48/
2
HC47/HC45/HC38/HC37
1
HDR-CX12/CX11/CX7/CX6
F
2
HDR-SR8/SR7/SR5
HDR-UX20/UX19/UX10/UX9,
DCR-DVD910/DVD850/DVD810/DVD710/
G
1
DVD650/DVD610/DVD510/DVD450/DVD410/
DVD310/DVD150/DVD115/DVD110
HDR-XR520V/XR520/XR500V/XR500/XR200V/
XR200/XR106/XR105/XR101/XR100,
H
1
HDR-SR12/SR11/SR10,
DCR-SR220/SR210
DCR-SR88/SR85/SR78/SR75/SR68/SR65/SR58/
1
SR55/SR46/SR45/SR36/SR35
I-2
2
HDR-XR350V/XR350
HDR-CX120/CX106/CX105/CX100,
J
1
DCR-SX60/SX50/SX41/SX40/SX31/SX30
DCR-SR87/SR77/SR67/SR57/SR48/SR47/SR38/
K
1
SR37
HDR-CX550V/CX550,
1
L
HDR-XR550V/XR550
2
HDR-XR155/XR150
2
L
1
START/STOP
PHOTO
2
OFF
ON/OFF
OFF
POWER
ON/OFF
HDR-HC9/HC7/HC5
ON
1
2
2 3
3
O
O
O
O
4
/
A/V
A/V OUT
A/V
HDR-UX20/UX19/UX10/UX9 DCR-DVD910/DVD510 DCR-SR87/SR77/
SR67/SR57/SR48/SR47/SR38/SR37 DCR-SX60/SX50/SX41/SX40/SX31/
SX30
DCR-SR87/SR77/SR67/SR57/SR48/SR47/SR38/SR37
/
-5-I
5
/
A/V
A/V OUT
A/V
4
ON/OFF
/
HDR-XR520V/XR520/XR500V/XR500
-5-A
HDR-XR200V/XR200/XR106/XR105/XR101/XR100
-5-B
HDR-SR12/SR11/SR10 DCR-SR220/SR210
-5-C
HDR-SR8/SR7/SR5
-5-D
HDR-XR155/XR150/XR350V/XR350 HDR-CX120/CX106/CX105/CX100
-5-E
HDR-CX12/CX11/CX7/CX6
-5-F
HDR-UX20/UX19/UX10/UX9 DCR-DVD910/DVD510
-5-G
-4

HDR-HC9/HC7/HC5
-5-H
DCR-SR87/SR77/SR67/SR57/SR48/SR47/SR38/SR37
-5-I
-4

DCR-SR85/SR75/SR65/SR55/SR46/SR45/SR36/SR35
-5-J
DCR-SX60/SX50/SX41/SX40/SX31/SX30
-5-K
-4

DCR-DVD850/DVD810/DVD710/DVD650/DVD610/DVD450/DVD410/
DVD310/DVD150/DVD115/DVD110
-5-L
DCR-DVD708/DVD608/DVD308/DVD306/DVD109/DVD108/DVD106
-5-M
HDR-CX550V/CX550/XR550V/XR550 DCR-HC62/HC54/HC53/HC52/
HC51/HC48/HC47/HC45/HC38/HC37
-5-N
DCR-SR88/SR78/SR68/SR58
(
-5-O)
6
English
Preparing
Notes
The models of Sony digital video camera recorders (referred to below as "camera")
described below may not be available in all countries/regions.
Preparing the Video Camera
For details, refer also to the operating instructions supplied with the camera.
1 Detach the accessory
Remove the filter, conversion lens, lens cap, lens hood or the shoulder strap from the
camera.
When using a camera with a manual lens shutter, open the lens shutter.
2 Install the battery pack.
Attach a fully recharged battery.
3 Insert the media.
Insert a media compatible with the camera.
For details, refer to the operating instructions supplied with the camera.
Notes
Unlock the write-protect tab on the "Memory Stick Duo" media and the cassette tape to
enable them to record images.
Make sure that the tape, "Memory Stick Duo" media, disc, hard disk and internal memory
have enough space to record images.
Make sure that the disc is not finalized.
4 Attach the reflex prevention ring to the filter attachment screw of the
camera.
The reflex prevention ring prevents external light from being reflected inside the sports
pack (referred to below as "this unit") and entering the lens.
When using a camera without a reflex prevention ring, keep your back away from
sunlight as much as possible.
Reflex prevention ring
Camera
HDR-UX20/UX19/UX10/UX9,
DCR-DVD910/DVD708/DVD608/DVD510/DVD308/
Reflex prevention ring
DVD306/DVD109/DVD108/DVD106,
(M30 × ø 43)
DCR-HC62/HC54/HC53/HC52/HC51/HC48/HC47/
HC45/HC38/HC37
HDR-XR155/XR150,
Reflex prevention ring
HDR-CX120/CX106/CX105/CX100,
(M30 × ø 47)
DCR-SR87/SR77/SR67/SR57/SR48/SR47/SR38/SR37
DCR-DVD850/DVD810/DVD710/DVD650/DVD610/
Reflex prevention ring
DVD450/DVD410/DVD310/DVD150/DVD115/DVD110,
(M30 × ø 50)
DCR-SR88/SR78/SR68/SR58
Reflex prevention ring
HDR-XR350V/XR350,
(M30 × ø 58)
DCR-SR85/SR75/SR65/SR55/SR46/SR45/SR36/SR35
HDR-XR200V/XR200/XR106/XR105/XR101/XR100,
Reflex prevention ring
HDR-SR10,
(M30 × ø 62)
DCR-SR220/SR210
HDR-XR550V/XR550/XR520V/XR520/XR500V/XR500,
Reflex prevention ring
HDR-SR12/SR11/SR8/SR7/SR5,
(M37 × ø 55)
HDR-HC9/HC7/HC5,
HDR-CX550V/CX550/CX12/CX11/CX7/CX6
Unable to attach the
DCR-SX60/SX50/SX41/SX40/SX31/SX30
supplied reflex prevention
ring
5 Turn the LCD panel around so that it faces outwards and place it back
in the camera.
6 Set functions such as focusing and lightning, to AUTO.
 Selecting the Camera Mounting Shoe
1 Choose the mounting shoe and the number according to the table
below.
Mounting shoe
Number Camera
HDR-HC9/HC7/HC5,
1
DCR-DVD708/DVD608/DVD308/DVD306/
DVD109/DVD108/DVD106
D
DCR-HC62/HC54/HC53/HC52/HC51/HC48/HC47/
2
HC45/HC38/HC37
1
HDR-CX12/CX11/CX7/CX6
F
2
HDR-SR8/SR7/SR5
HDR-UX20/UX19/UX10/UX9,
DCR-DVD910/DVD850/DVD810/DVD710/DVD650/
G
1
DVD610/DVD510/DVD450/DVD410/DVD310/
DVD150/DVD115/DVD110
HDR-XR520V/XR520/XR500V/XR500/XR200V/
XR200/XR106/XR105/XR101/XR100,
H
1
HDR-SR12/SR11/SR10,
DCR-SR220/SR210
DCR-SR88/SR85/SR78/SR75/SR68/SR65/SR58/SR55/
1
I-2
SR46/SR45/SR36/SR35
2
HDR-XR350V/XR350
HDR-CX120/CX106/CX105/CX100,
J
1
DCR-SX60/SX50/SX41/SX40/SX31/SX30
K
1
DCR-SR87/SR77/SR67/SR57/SR48/SR47/SR38/SR37
HDR-CX550V/CX550,
1
HDR-XR550V/XR550
L
2
HDR-XR155/XR150
2 Align the tripod screw plate with the chosen number on the
mounting shoe and press the tripod screw plate until it clicks into
place.
The tripod screw plate is attached to the mounting shoe L when the unit is shipped
from the factory.
 Preparing the Sports Pack
1 Adjust the grip belt.
Adjust the length of the grip belt while holding this unit so that the tips of your fingers
can easily touch the START/STOP button, Telephoto button, Wide button and PHOTO
button.
2 Attach the shoulder strap.
Installing the Video Camera
When using a camera with a POWER switch, turn the POWER switch off. Also leave the
power of this unit turned off. When using a camera with an internal power switch linked
to the switching action of the LCD screen, you do not need to turn off the camera.
Notes
After installing the camera into this unit, you can turn the power of the camera on and
off by pressing the POWER button of this unit.
When using the HDR-HC9/HC7/HC5, turn the POWER switch on.
1 Release the buckles.
 Slide the unlock button  in the direction of the arrow and hold it, then slide the
open slider  and release the buckle.
 Open the rear body.
2 Coat the front glass with anti-fogging lens solution.
Apply 2 to 3 drops of the anti-fogging lens solution provided onto the inside surface
of the front glass of this unit. To increase the anti-fogging effect, use the desiccant
supplied. For details, refer to "Desiccant" in the supplied operating instructions.
3 Remove foreign materials such as dust, sand or hair from the O-ring,
groove and any surface the camera touches, and then apply the
grease evenly to the O-ring.
If the body is closed with such materials present, those areas may be damaged and
water may leak in.
For details on handling the O-ring, refer to "Handling the O-ring" in the operating
instructions.
4 Attach the camera mounting shoe.
 Align the screw position of the mounting shoe with the tripod screw on the bottom
of the camera.
 When using one of the models below, open the jack cover and firmly insert the
Audio/Remote plug into the A/V jack, A/V OUT jack or A/V remote jack:
HDR-UX20/UX19/UX10/UX9, DCR-DVD910/DVD510, DCR-SR87/SR77/SR67/
SR57/SR48/SR47/SR38/SR37, DCR-SX60/SX50/SX41/SX40/SX31/SX30
When using the DCR-SR87/SR77/SR67/SR57/SR48/SR47/SR38/SR37, insert the
Audio/Remote plug with the jack cover sufficiently open. (See illustration -5-I
) If the jack cover is not sufficiently open, it may jam the Audio/Remote plug
and cause a poor connection.
 Attach the camera mounting shoe to the camera using the metal parts of shoulder
strap as illustrated.
5 Connect the plug and install the camera.
Depending on your camera, firmly insert the Audio/Remote plug into the A/V jack,
A/V OUT jack or A/V remote jack. (except camera models in step 4)
When installing the camera into this unit, align the camera mounting shoe with the
guide inside the front body of this unit, and then push the rear of the camera mounting
shoe until it clicks into place.
Notes
Be sure to keep this unit horizontal when installing the camera mounting shoe.
Installing the camera mounting shoe in a vertical motion may damage the camera
mounting shoe and the front body.
Be sure not to cover the lens, LCD screen, view finder, zoom lever or PHOTO button
with the cable.
When using a camera with an internal power switch linked to the switching action
of the LCD screen, connecting the Audio/Remote plug will switch the Still image
recording mode/Video playing mode of the camera to Movie recording mode.
When using HDR-XR520V/XR520/XR500V/XR500 (See illustration -5-A)
 Open the jack cover and connect the plug. (Arrange the cable connected to this unit
in a loop towards the rear of the plug, as illustrated.)
 Install the camera into this unit, taking care not to catch the cable on the parts
inside this unit.
 After installing the camera into this unit, arrange the cable on the grip belt side of
the camera.
When using HDR-XR200V/XR200/XR106/XR105/XR101/XR100 (See illustration
-5-B)
 Open the jack cover and connect the plug.
 Arrange the cable connected to this unit in a loop towards the rear of the plug, as
illustrated.
 Install the camera into this unit, taking care not to catch the cable on the parts
inside this unit.
 After installing the camera into this unit, arrange the cable on the grip belt side of
the camera.
When using HDR-SR12/SR11/SR10, DCR-SR220/SR210 (See illustration -5-C)
 Open the jack cover and connect the plug. (Arrange the cable connected to this unit
in a loop towards the rear of the plug, as illustrated.)
 After installing the camera into this unit, lightly press the cable to arrange it on the
grip belt side of the camera.
When using HDR-SR8/SR7/SR5 (See illustration -5-D)
 Open the jack cover.
 Connect the plug.
 After installing the camera into this unit, arrange the cable on the grip belt side of
the camera.
When using HDR-XR155/XR150/XR350V/XR350 or HDR-CX120/CX106/CX105/
CX100 (See illustration -5-E)
 Open the jack cover and connect the plug.
 After installing the camera into this unit, arrange the cable on the grip belt side
of the camera, taking care not to catch the cable on the camera mounting shoe or
other parts.
When using HDR-CX12/CX11/CX7/CX6 (See illustration -5-F)
 Open the jack cover.
 Connect the plug.
 Put the cable on the camera mounting shoe and install the camera into this unit.
 After installing the camera into this unit, arrange the cable on the grip belt side
of the camera, placing the cable so that it does not fall from the camera mounting
shoe.
When using HDR-UX20/UX19/UX10/UX9 or DCR-DVD910/DVD510 (See
illustration -5-G)
(If you completed the following  and  in step -4, start from .)
 Connect the plug.
 Attach the camera mounting shoe to the camera.
 After installing the camera into this unit, arrange the cable. (Hook the cable to the
cable holder.)
When using HDR-HC9/HC7/HC5 (See illustration -5-H)
 Open the jack cover.
 Connect the plug.
 After installing the camera into this unit, arrange the cable on the grip belt side of
the camera.
When using DCR-SR87/SR77/SR67/SR57/SR48/SR47/SR38/SR37 (See
illustration -5-I)
(If you completed the following  and  in step -4, start from .)
 Attach the plug, opening the jack cover enough for it not to catch the base of the
plug.
 Attach the camera mounting shoe to the camera.
 Install the camera into this unit, keeping the cable on the top side of the camera.
 Secure the cable in the clip of the camera mounting shoe, taking care not to catch
the cable on the LCD screen.
If the camera battery is too large for the cable to be passed behind it, pass the
cable along the top of the battery and fasten the cable with clips.
When using DCR-SR85/SR75/SR65/SR55/SR46/SR45/SR36/SR35 (See
illustration -5-J)
 Open the jack cover and connect the plug. (Arrange the cable connected to this unit
in a loop towards the rear of the plug, as illustrated.)
 After installing the camera into this unit, lightly press the cable to arrange it on the
grip belt side of the camera.
When using DCR-SX60/SX50/SX41/SX40/SX31/SX30 (See illustration -5-K)
(If you completed the following  and  in step -4, start from .)
 Lift the grip belt and open the jack cover to connect the plug.
 Attach the camera mounting shoe to the camera.
 Install the camera into this unit with the cable curled on the top side of the camera.
 After installing the camera into this unit, arrange the cable. (Hook the cable to the
cable holder.)
When using DCR-DVD850/DVD810/DVD710/DVD650/DVD610/DVD450/
DVD410/DVD310/DVD150/DVD115/DVD110 (See illustration -5-L)
 Open the jack cover.
 Connect the plug.
 Clip the cable into the groove of the reflex prevention ring on the grip belt side as
illustrated.
 Arrange the cable as illustrated and attach the camera mounting shoe to this unit.
Notes on attachment:
Do not bend the cable.
Make sure that the cable has not come off the groove of the reflex prevention ring.
 After installing the camera into this unit, make sure that the cable is not interfering
with the lens of the camera.
When using DCR-DVD708/DVD608/DVD308/DVD306/DVD109/DVD108/
DVD106 (See illustration -5-M)
 Open the jack cover.
 Connect the plug.
 After installing the camera into this unit, arrange the cable.
When using the HDR-CX550V/CX550/XR550V/XR550 or DCR-HC62/HC54/
HC53/HC52/HC51/HC48/HC47/HC45/HC38/HC37 (See illustration -5-N)
 Open the jack cover.
 Connect the plug.
 After installing the camera into this unit, arrange the cable. (Hook the cable at the
cable holder.)
When using DCR-SR88/SR78/SR68/SR58 (See illustration -5-O)
 Open the jack cover.
 Connect the plug.
 Clip the cable into the groove of the reflex prevention ring as illustrated.
 Arrange the cable as illustrated and attach the camera mounting shoe to this unit.
Notes on attachment:
Do not bend the cable.
Make sure that the cable has not come off the groove of the reflex prevention ring.
 After installing the camera into this unit, make sure that the cable is not interfering
with the lens of the camera.
6 Close the rear body.
Press the rear body shut and fasten the buckles until they click in place.
Notes
Be careful not to pinch the cables when closing the rear body.
Although the center of the lens of some camera models may be out of line with the
center of the front glass of this unit when installed, this does not cause any problems
when recording.

Advertisement

loading

Summary of Contents for Sony SPK-HCF

  • Page 1 SR55/SR46/SR45/SR36/SR35 other parts. Notes HDR-XR350V/XR350 When using HDR-CX12/CX11/CX7/CX6 (See illustration -5-F) The models of Sony digital video camera recorders (referred to below as “camera”) HDR-CX120/CX106/CX105/CX100,  Open the jack cover. described below may not be available in all countries/regions.  Connect the plug. DCR-SX60/SX50/SX41/SX40/SX31/SX30 Preparing the Video Camera ...
  • Page 2 Remarques Si vous utilisez le HDR-CX12/CX11/CX7/CX6 (Voir l’illustration -5-F) Les modèles de caméscopes numériques Sony (appelés ci-dessous le « caméscope ») mentionnés ci-dessous peuvent ne pas être commercialisés dans tous les pays ou toutes les  Ouvrez le cache-prise. régions.