Starting the wash programme
1. Check that the water tap is open.
2. To start the wash programme, press the START/PAUSE pushbutton
The wash programme starts.
"
If the END light
times* when the START/PAUSE pushbutton
properly closed. In this case, push the lid in firmly, and press the START/
PAUSE pushbutton
* Depending on the model, some acoustic signals may appear.
Programme progress
Programme progress display
Prior to the start, the chosen programme stepd are displayed by
the programme progress display. During the wash programme,
the current programme step is displayed.
Changing the washing programme
Changing or cancelling the programme
1. Press the START/PAUSE pushbutton
2. Turn the programme selector to the OFF position " ". The washing
programme is cancelled.
3. Set another washing programme, if required.
Otherwise, turn the programme selector to the DRAIN
programmes and press the START/PAUSE pushbutton
The washing programme can be temporarily interrupted at any time by
pressing the START/PAUSE pushbutton
the pushbutton again. A washing programme can only be changed after the
programme selector has been turned to the OFF position " ".
Selecting a programme option
The programme option QUICK
programme has started.
1. Press the START/PAUSE pushbutton
2. Press the QUICK pushbutton
3. Press the START/PAUSE pushbutton
"
flashes 4 times and an acoustic signal is emitted 4
again.
" "
" "
" "
"
"
can still be selected after the
" "
"
"
.
. The washing programme goes on.
" "
User's instructions
is pressed, the lid is not
" "
.
"
"
or SPIN
.
" "
. It is then re-started by pressing
.
.
" "
" "
23