Connecting To External Equipment - Sharp Aquos LC-60LE550U Operation Manual

Connecting to External Equipment

You can connect many types of external equipment to your TV. To view external source images, select the input
source from INPUT on the remote control unit or on the TV. (See page 16.)
For connecting the TV to external equipment, use commercially available cables.
• The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
• To protect equipment, always turn off the TV before connecting any external equipment.
CAUTION
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
■ Connecting a Blu-ray Disc Player, DVD Player, Cable/Satellite Set-top Box, VCR, Game Console or Camcorder
Terminal on external
equipment
HD
Quality
AUDIO OUT
DVI OUT
Standard
Quality
*1 Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
*2 When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the HDMI IN 1 terminal, connect a ø 3.5 mm stereo minijack cable to the AUDIO
IN terminal and set "PC Audio Select" to "HDMI1". (See page 21.)
*3 To enjoy 1080p display capability, connect your external equipment using an HDMI-certifi ed cable or a component cable and
set the equipment to 1080p output.
■ Connecting an Audio Amplifi er
Terminal on external
equipment
*4 The DIGITAL AUDIO OUT terminal does not output the audio signals from external equipment connected to the HDMI IN
terminals. In this case, make analog audio connections to the AUDIO OUT terminals.
*5 See page 25 for details on the Output Select function.
■ Connecting a PC
Terminal on PC
Analog RGB cable (D-sub 15-pin cable or VGA cable)
OUT
DVI OUT AUDIO OUT
*6 When connecting a PC to the PC IN, set "PC Audio Select" to "PC IN". (See page 21.)
*7 Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable
to the HDMI IN 1 terminal, connect a ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "PC Audio Select" to
"HDMI1". (See page 21.)
• The HDMI IN terminals only support digital signal.
• Refer to page 28 for a list of PC signals compatible with the TV.
Cable
HDMI-certified cable
or
DVI-HDMI conversion cable
ø 3.5 mm stereo minijack cable
Component video cable
Audio cable
AV cable
Cable
Optical fiber cable
Audio cable
Cable
ø 3.5 mm stereo minijack cable
HDMI-certified cable
or
DVI-HDMI conversion cable
ø 3.5 mm stereo minijack cable
12
Terminal on the TV
*1
HDMI IN 1, 2 or 3
*2
*3
AUDIO IN
COMPONENT IN
*3
VIDEO IN
Terminal on the TV
*4
DIGITAL AUDIO
OUT
*5
AUDIO OUT
Terminal on the TV
*6
PC IN
AUDIO IN
*7
HDMI IN 1, 2 or 3
AUDIO IN