EarthQuake TNT - T693 Specifications And Installation

TNT - T693 Specifications and Installation
FEATURES
Low mass poly injection cone
body that delivers precision
sound quality
High flow ventilation stamped
steel basket design
Large butyl rubber surround
for more accurate bass
NOMEX / ROMEX spider
assembly for linear cone
travel and durability
Shallow mount design for
American or foreign cars and
trucks
2" (66mm) mylar mid-range
and over 1" (30mm) mylar
super tweeter both of which
deliver an exceptionally high
frequency for all ranges of
music.
SPECIFICATIONS
Model
Diameter (inches)
Diameter (mm)
Description
Impedance
Frequency Response
Sensitivity
Power Handling
INSTALLATION
Grilles
Mounting Diameter (inches)
Mounting Diameter (mm)
Mounting Depth (inches)
Mounting Depth (mm)
Sound That Will Move You
108mm - 4-1/4"
220mm x 151mm - 5-19/20" x 8-7/10"
236mm - 9-3/10"
T693
6" x 9"
152.4mm x 228.6mm
3-Way
4-Ohm
20Hz - 22kHz
90dB
600 Watts
Yes
5-19/20" x 8-7/10"
151mm x 220mm
3-6/16"
86mm
www.earthquakesound.com
CUSTOM SPEAKER INSTALLATION
NOTE:
Hand tighten the screws
in a crisscross pattern to
avoid bending the speaker
basket or stripping screws.
FACTORY REPLACEMENT INSTALLATION
4 SCREWS PER SPEAKER SPEAKER
NOTE:
Hand tighten the screws
in a crisscross pattern to
avoid bending the speaker
basket or stripping screws.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
FACTORY CUTOUT MOUNTING CLIPS