Advertisement
Quick Links
Flush Mount Assembly
Angle Mount Assembly & Installation
Earthquake has provided two (2)
mounting screws to be used in
the Angle and Surface options
Mounting screws
Panel
TW-25S & TW-35S Installation Guide
Flush Mount Complete assembly
Top Ring
Make sure that
the top ring and
bottom cup snap
when pushed
together
Bottom Cup
Top Ring
Bottom Cup
www.earthquakesound.com
Flush Mount Installation
Push assembled tweeter through cut out hole
Cut diameter: TW-25S=2" (50.8mm), TW-35S=3" (76.20mm)
Panel
Surface Mount Assembly & Installation
Fasten the panel
clamp down from
behind the panel.
Panel Clamp
Twist on nut
until the
tweeter is
secured
Top Ring
Panel
Bottom Cup
Advertisement
