Desa PN36-A Owners Manual And Installation Manual

Peninsula woodburning fireplace

Advertisement

Peninsula woodBurning FirePlace
owner's oPeraTion and insTallaTion Manual
ICC-ES #ESR-2542
Models (V)PN36-A
SAVE THIS BOOK
This book is valuable. In addition to instructing you
on how to install and maintain your appliance, it also
contains information that will enable you to obtain re-
placement parts or accessory items when needed. Keep
it with your other important papers.
This fireplace is approved for use as a wood burning
fireplace or for use with a vented gas log approved to
ANS Z21.60, Z21.84 or RGA 2-72 standards or for use
with a vent-free gas log heater approved to ANS Z21.11.2
standard.
This wood burning fireplace complies with UL127-
CAN/ULS-S610-M87 standard as a FACTORY BUILT
APPLIANCE.
FOR CANADA: The authority having jurisdiction (such
as the municipal building department, fire department,
etc.) should be contacted before installation to deter-
mine the need to obtain a permit.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
For more information, visit www.desatech.com

Advertisement

Table of Contents
loading

Summary of Contents for Desa PN36-A

  • Page 1 Peninsula woodBurning FirePlace owner’s oPeraTion and insTallaTion Manual ICC-ES #ESR-2542 Models (V)PN36-A SAVE THIS BOOK This book is valuable. In addition to instructing you on how to install and maintain your appliance, it also contains information that will enable you to obtain re- placement parts or accessory items when needed.
  • Page 2: Table Of Contents

    WARNING: Improper installation, adjustment, altera- tion, service or maintenance can cause injury, property damage or loss of life. Refer to this manual for assis- tance or additional information. Consult a qualified installer or local distributor. TaBle oF conTenTs Safety ..............2 Optional Gas Line Installation......
  • Page 3: Product Dimensions

    saFeTy WARNING: Always leave Continued glass doors fully opened or fully closed when operating WARNING: Use solid wood fireplace. or processed solid fuel fire logs only. When processed wood WARNING: Children and fuel fire logs are used, do not adults should be alerted to the poke or stir the logs while they hazards of high surface tempera- are burning.
  • Page 4: Fireplace Installation

    FirePlace insTallaTion Spacers on Sides of Fireplace Provide 2" (5cm) Min. Clearance Required 1" (2.5cm) From Pipe to SELECTING LOCATION Clearance Combustibles To determine the safest and most efficient location for the fireplace, you must take into consideration the following guidelines: 1.
  • Page 5: Hearth Extension

    FirePlace insTallaTion Continued 2. If fireplace is to be installed directly on carpeting, tile (other than ceramic) or any combustible material other than wood flooring, fireplace must be installed upon 1/2" MIN. a metal or wood panel extending full width OVERLAP and depth of fireplace.
  • Page 6: Venting Installation

    FirePlace insTallaTion 2" X 4" Stud Continued Drywall Combustible Materials 33° 6" Nom. 12" Min. 9" Min. Fireplace Side View Front 3" Nom. Face 64" Min. " Max. 65" Min. Fireplace Front View 16" 20" Min. Min. Figure 11 - Mantel Clearances to Combustible Materials Figure 9 - Hearth Extensions Noncombustible...
  • Page 7 VenTing insTallaTion PIPE INSTALLATION The pipe sections must be assembled inde- Continued pendently as the chimney is installed. When Secure to Collars with connecting chimney directly to the fireplace, Duct Tape or Screws the inner flue pipe section must be installed first with the lanced side up.
  • Page 8 VenTing insTallaTion 2" (5.1cm) Minimum Continued Maximum length of pipe between supports Angled Firestop is 6' of angle run. Maximum of two 6' angle 2" (5.1cm) run sections per chimney system (see Figure Minimum 9, page 6). Ceiling Support 12S-12DM Support Straps Required...
  • Page 9 VenTing insTallaTion Uncommon circumstances such as neigh- boring hills, tall trees, or strong wind areas Continued can cause down drafts in chimney system. Existing In such cases, going beyond the minimum Ceiling recommended height would be preferable to Frame provide a better draw. Firestop The fireplace height approved for any chim- Spacer...
  • Page 10 VenTing insTallaTion Storm Overlap Collar Continued Shingles Top Flashing and Sides Only PENETRATING ROOF Cone To maintain a 1" clearance to pipe on a roof with Nail Only a pitch, a rectangular opening must be cut. Outer Perimeter 1. Determine the center point through which of Flashing pipe will penetrate roof.
  • Page 11: Chase Installations

    VenTing insTallaTion FINIShING FIREPLACE Continued Combustible materials, such as wallboard, gypsum board, sheet rock, drywall, plywood, RTL-12DM Stainless etc. may make direct contact with sides and Inner Flue Chase top around the fireplace face. It is important Pipe that combustible materials do not overlap the Screen face itself.
  • Page 12: Optional Gas Line Installation

    oPTional gas line CAUTION: All gas piping insTallaTion and connections must be tested for leaks after the installation WARNING: A qualified is completed. After ensuring service person must connect that the gas valve is on, apply fireplace to gas supply. Follow soap and water solution to all all local codes.
  • Page 13: Operation And Maintenance Guidelines

    oPTional gas line The following tips should be followed to as- sure that both the fireplace and glass door insTallaTion retain their beauty and function properly. Continued • Both the flue damper and glass doors must be fully opened before starting fire. This will provide sufficient combustion air and WARNING: If the fireplace maintain safe temperatures in firebox.
  • Page 14: Technical Service

    oPeraTion and GRATE The grate is designed to provide you with the MainTenance maximum solid fuel capacity. Do not overload guidelines grate or obstruct required air space beneath Continued it. Doing so may cause smoke spillage and a fire hazard. DAMPER MEChANISM The damper control lever is located inside the WARNING: Risk of fire! Re-...
  • Page 15: Replacement And Accessory Parts

    rePlaceMenT and accessory ParTs ADjUSTABLE hOOD Vent Plaster Black - 01244 Vent Hood Collar Brass - 01245 Chrome - 01246 Connector Duct - 4" x 3' OUTSIDE AIR KIT - AK4 GRATE 11150 STORM COLLAR - SC2-1 FIRESTOP SPACER FS-10 for Straight Pipe EMBER 30FS-10 for 30°...
  • Page 16 DESA Heating, LLC 2701 Industrial Drive Bowling Green, KY 42101 www.desatech.com 1-866-672-6040 115607-01 Rev. C 115607 01 06/08 NOT A UPC...

This manual is also suitable for:

Vpn36-a

Table of Contents