Related Manuals for Samsung S24C230JL
Summary of Contents for Samsung S24C230JL
-
Page 1: User Manual
User Manual S24C230BL S24C230JL S24C230JY S27C230B S27C230J The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00314A-02... -
Page 2: Table Of Contents
Table Of Contents BEFORE USING THE Copyright PRODUCT Icons used in this manual Cleaning Cleaning Precautions for Storage Securing the Installation Space Precautions for storage Safety Precautions Symbols Electricity and Safety Installation and Safety Operation and Safety Correct posture to use the product PREPARATIONS Checking the Contents Removing the Packaging... - Page 3 Table Of Contents Connecting and Using a PC Connecting a Computer to S24C230BL and S27C230B. Connecting a Computer to S24C230JL, S24C230JY and S27C230J Driver Installation Changing the Resolution Using a PC USING THE OSD MENU SAMSUNG MAGIC Bright ON S24C230BL AND...
- Page 4 Table Of Contents USING THE OSD MENU SAMSUNG MAGIC Bright ON S24C230JL, Configuring SAMSUNG MAGIC Bright S24C230JY AND Brightness Configuring Brightness S27C230J Contrast Configuring Contrast SAMSUNG MAGIC Upscale Configuring SAMSUNG MAGIC Upscale Gamma Configuring Gamma PC/AV Mode Configuring PC/AV Mode...
- Page 5 Table Of Contents APPENDIX Contact SAMSUNG WORLD WIDE Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
-
Page 6: Before Using The Product
The contents of this manual are subject to change without notice to improve quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft and Windows are registered trademarks of Microsoft Corporation. -
Page 7: Cleaning
Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. -
Page 8: Securing The Installation Space
(10 cm) (10 cm) 3.93 inches(10 cm) Precautions for storage Be sure to contact Samsung Customer Service Center (page 67) if the inside of the monitor needs cleaning. (A service fee will be charged.) Before Using the Product... -
Page 9: Safety Precautions
Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. -
Page 10: Electricity And Safety
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result. -
Page 11: Installation And Safety
The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. - Page 12 Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product ...
-
Page 13: Operation And Safety
SAMSUNG time) may seriously affect its performance. Be sure to consult Samsung Customer Service Center (page 67) before installation if you want to install the product at such a place. - Page 14 (paper, match, etc.) into the vent or ports of the product. If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (page 67). Product failure, an electric shock or fire may result.
- Page 15 Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. If you are not going to use the product for an extended period of time, ...
- Page 16 Before Using the Product Do not hold the monitor upside-down or move it by holding the stand. The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. An electric shock or fire may result. ...
-
Page 17: Correct Posture To Use The Product
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: Straighten your back. Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. -
Page 18: Preparations
Preparations Checking the Contents 1.1.1 Removing the Packaging Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. Remove the styrofoam from the product. Check the components and remove the styrofoam and plastic bag. This image is for reference only. -
Page 19: Checking The Components
Preparations 1.1.2 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown. Components - S24C230BL, S27C230B Quick setup guide Warranty card User manual... - Page 20 Preparations Components - S24C230JL, S24C230JY, S27C230J Quick setup guide Warranty card User manual (Not available in some locations) Power cable DC power adapter DVI cable (optional) Stand Stand Connector headphone holder (optional) screws (optional) Components may vary depending on the country.
-
Page 21: Parts
Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Icons Description Press this button to display the On Screen Display (OSD). When in the menu, press this button to move down to the option ... -
Page 22: Reverse Side
Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S24C230JL, S24C230JY, S27C230J S24C230BL, S27C230B Port About ports DC 14V Connects to the DC power adapter. -
Page 23: Installation
Preparations Installation 1.3.1 Attaching the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the stand neck into the Check that the stand neck is Tightly fasten the connecting stand base in the direction firmly connected. - Page 24 Preparations Hold the main body of the - Caution product with your hand as shown Do not hold the product upside by the figure. down only by the stand. Push the assembled stand into the main body in the direction of the arrow as shown in the figure.
-
Page 25: Removing The Stand
Preparations 1.3.2 Removing the Stand Disassembly is the reverse order of assembly. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product faces downwards. -
Page 26: Adjusting The Product Tilt And Height
Preparations 1.3.3 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -1.0°(±2.0°) ~20.0°(±2.0°) You can adjust the tilt of your monitor. ... -
Page 27: Anti-Theft Lock
Preparations 1.3.4 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. The color and shape of parts may differ from what is shown. -
Page 28: Connecting And Usinga Source Device
Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. ... -
Page 29: Connecting And Using A Pc
Connecting and Using a Source Device Connecting and Using a PC 2.3.1 Connecting a Computer to S24C230BL and S27C230B. Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection Using the DVI Cable Do not connect the power cable before connecting all other cables. -
Page 30: Connecting A Computer To S24C230Jl, S24C230Jy And S27C230J
From the OSD menu, change the input source to DVI. (Refer to "3.9 Source" for further details on how to change the input source.) 2.3.2 Connecting a Computer to S24C230JL, S24C230JY and S27C230J Select a connection method suitable for your PC. -
Page 31: Driver Installation
An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and download the file. Insert the user manual CD provided with the product into the CD-ROM drive. -
Page 32: Changing The Resolution Using A Pc
Connecting and Using a Source Device 2.3.4 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. ... -
Page 33: Connecting And Using A Source Device
Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution. *********** *********** 2 Connecting and Using a Source Device... - Page 34 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution. 2 Connecting and Using a Source Device...
- Page 35 Connecting and Using a Source Device Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution and change the resolution. 2 Connecting and Using a Source Device...
-
Page 36: Using The Osd Menu On S24C230Bl And
SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. You can customize the brightness to suit your preferences. 3.1.1 Configuring SAMSUNG MAGIC Bright MENU Press [ ] on the product. -
Page 37: Configuring Brightness
Using the OSD Menu on S24C230BL and S27C230B Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG This menu is not available when Bright is set to Dynamic Contrast mode. -
Page 38: Contrast
Using the OSD Menu on S24C230BL and S27C230B Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. SAMSUNG This option is not available when Bright is in Cinema Dynamic Contrast mode. -
Page 39: Gamma
Using the OSD Menu on S24C230BL and S27C230B Gamma Adjust the mid-range brightness (Gamma) of the picture. SAMSUNG This option is not available when Bright is in Cinema Dynamic Contrast mode. MAGIC 3.4.1 Configuring Gamma MENU Press [ ] on the product. - Page 40 Using the OSD Menu on S24C230BL and S27C230B Auto Adjustment You can adjust the screen settings automatically. This function is only available in Analog mode. 3.5.1 Using Auto Adjustment MENU Press [ ] on the product. Press [ ] to move to Auto Adjustment and press [ ] on the product.
-
Page 41: Pc/Av Mode
3.6.1 Configuring PC/AV Mode MENU Press [ ] on the product. Press [ ] to move to PC/AV Mode and press [ ] on the product. The following screen will appear. SAMSUNG Bright MAGIC Brightness Contrast Gamma Auto Adjustment PC/AV Mode Image Size... -
Page 42: Changing The Image Size
MENU Press [ ] on the product. Press [ ] to move to Image Size and press [ ] on the product. The following screen will appear. mode SAMSUNG Bright MAGIC Brightness Contrast Gamma Auto Adjustment PC/AV Mode Image Size Auto: Display the picture according to the aspect ratio of the input source. - Page 43 Using the OSD Menu on S24C230BL and S27C230B The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of these signals). This can only be set when the external input is connected through DVI and PC/AV Mode ...
-
Page 44: Language
Using the OSD Menu on S24C230BL and S27C230B Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. ... -
Page 45: Source
Using the OSD Menu on S24C230BL and S27C230B Source Using this menu, you can change the input signal (Analog/DVI). If the monitor is in power saving mode or is displaying the message Check Signal Cable, press MENU MENU ] to display the OSD.In this OSD press [ ] and [ ] to change the input signal (Analog/DVI). -
Page 46: Exit
Using the OSD Menu on S24C230BL and S27C230B 3.10 Exit You can exit the OSD. View the current input source, frequency and resolution. Language Source Analog Exit **kHz **Hz NP **** x **** Optimal Mode **** x **** **Hz 3.10.1 Viewing the Product Information MENU Press [ ] on the product. -
Page 47: Using The Osd Menu
Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment. Press [ ] to move to the option you want and press [ The selected option will be applied. 4 Using the OSD Menu on S24C230JL, S24C230JY and S27C230J... -
Page 48: S24C230Jy And
The following screen will appear. SAMSUNG Bright Custom MAGIC Brightness Contrast SAMSUNG Upscale : Off MAGIC Gamma : Mode1 PC/AV Mode Image Size : Auto Adjust the Brightness using the [ ] buttons. 4 Using the OSD Menu on S24C230JL, S24C230JY and S27C230J... - Page 49 The following screen will appear. SAMSUNG Bright : Custom MAGIC Brightness Contrast SAMSUNG Upscale : Off MAGIC Gamma : Mode1 PC/AV Mode Image Size : Auto Adjust the Contrast using the [ ] buttons. 4 Using the OSD Menu on S24C230JL, S24C230JY and S27C230J...
-
Page 50: Samsung Magic Upscale
Image Size : Auto Comparing with Mode1, Mode2 has a stronger effect. Press [ ] to move to the option you want and press [ The selected option will be applied. 4 Using the OSD Menu on S24C230JL, S24C230JY and S27C230J... - Page 51 : Mode1 Mode1 Mode2 PC/AV Mode Mode3 Image Size : Auto Press [ ] to move to the option you want and press [ The selected option will be applied. 4 Using the OSD Menu on S24C230JL, S24C230JY and S27C230J...
- Page 52 : Mode1 PC/AV Mode Image Size : Auto PC/AV Mode : PC Press [ ] to move to the option you want and press [ The selected option will be applied. 4 Using the OSD Menu on S24C230JL, S24C230JY and S27C230J...
- Page 53 16:9: Display the picture with an aspect ratio of 16:9. Screen Fit: Display the picture with the original aspect ratio without cutting off. Changing the screen size is available when the following conditions are satisfied. 4 Using the OSD Menu on S24C230JL, S24C230JY and S27C230J...
- Page 54 This can only be set when the external input is connected through DVI and PC/AV Mode set to AV. Press [ ] to move to the option you want and press [ The selected option will be applied. 4 Using the OSD Menu on S24C230JL, S24C230JY and S27C230J...
- Page 55 **kHz **Hz NP **** x **** Optimal Mode **** x **** **Hz Press [ ] to move to the language you want and press [ The selected option will be applied. 4 Using the OSD Menu on S24C230JL, S24C230JY and S27C230J...
- Page 56 4.9.2 Exiting from the OSD Menu MENU Press [ ] on the product. Press [ ] to move to Exit and press [ ] on the product. This will close the OSD menu. 4 Using the OSD Menu on S24C230JL, S24C230JY and S27C230J...
-
Page 57: Troubleshooting
Requirements Before Contacting Samsung Customer Service Center 5.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. -
Page 58: Guide
Troubleshooting Guide Screen issue Not Optimum Mode is displayed. This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 65). -
Page 59: Guide
Troubleshooting Guide Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? Windows XP: Go to Control Panel Appearance and Themes Display Settings Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Go to Control Panel Display ... -
Page 60: Guide
Troubleshooting Guide Question Answer How can I change the Windows XP: Go to Control Panel Appearance and resolution? Themes Display Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. Windows Vista: Go to Control Panel Appearance and ... -
Page 61: Specifications
Specifications General Model Name S24C230BL S24C230JL S24C230JY Panel Size 23.6 Inches (59 cm) Display area 521.28 mm x 293.22 mm (H x V) 20.52 x 11.54 Inches Pixel Pitch 0.2715 x 0.2715 mm (H x V) 0.010689 x 0.010689 Inches... - Page 62 644.8 × 485.2 × 242.0 mm / 4.7 25.4 x 18.0 x 9.5 Inches / 10.1 25.4 x 18.0 x 9.5 Inches / 10.4 S24C230BL / S24C230JL / S24C230JY / S27C230B / S27C230J Synchronization Horizontal Frequency 30 ~ 81 kHz...
- Page 63 Specifications S24C230BL / S24C230JL / S24C230JY / S27C230B / S27C230J Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two- way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically.
- Page 64 Power saving Power off PowerSaver Power mode (Power button) Consumption Power Indicator Blinking S24C230BL Typical Typical 18 watts S24C230JL 0.3 W 0.3 W Power S24C230JY Consumption Typical Typical S27C230B 22 watts 0.3 W 0.3 W S27C230J The power consumption level can vary in different operating conditions or when settings are ...
-
Page 65: Standard Signal Mode Table
Specifications Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. - Page 66 Specifications Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (Hz) (MHz) (H/V) (kHz) VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900RB 60.000 60.000 108.000 VESA, 1680 x 1050 65.290 59.954 146.250 VESA, 1920 x 1080 67.500 60.000 148.500 Horizontal Frequency...
-
Page 67: Contact Samsung World Wide
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com... - Page 68 VENEZUELA 0-800-100-5303 http://www.samsung.com EUROPE AUSTRIA 0810 - SAMSUNG http://www.samsung.com (7267864, € 0.07/min) BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 051 133 1999 http://www.samsung.com BULGARIA 07001 33 11 , normal tariff http://www.samsung.com CROATIA 062 SAMSUNG (062 726 786) http://www.samsung.com Appendix...
- Page 69 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 till 8.2.2013 . From 8.2.2013: Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4 DENMARK 70 70 19 70 http://www.samsung.com...
- Page 70 +381 11 321 6899 http://www.samsung.com (old number still active 0700 7267864) SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG http://www.samsung.com/ch (7267864, CHF 0.08/min) (German) http://www.samsung.com/ch_fr...
- Page 71 1800 266 8282 INDONESIA 0800-112-8888 http://www.samsung.com/id 021-5699-7777 JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com/my NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) http://www.samsung.com/ph for PLDT 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com...
- Page 72 Appendix MENA KUWAIT 183-2255 (183-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) MOROCCO 080 100 2255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) QATAR 800-2255 (800-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/sa (Arabic) SYRIA 18252273 http://www.samsung.com/Levant (English) TURKEY 444 77 11 http://www.samsung.com...
-
Page 73: Responsibility For The Pay Service (Cost
use of supplies or separately sold product unspecified by Samsung. repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd. remodeling or repairing the product by customer. -
Page 74: Correct Disposal
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. -
Page 75: Terminology
Appendix Terminology OSD (On Screen Display) On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. - Page 76 Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g.
- Page 77 Index PowerSaver Auto Adjustment Q & A Before Connecting Brightness Requirements Before Contacting Samsung Customer Service Center Responsibility for the Pay Service (Cost to Checking the Contents Customers) Cleaning Connecting and Using a PC Contact SAMSUNG WORLD WIDE Safety Precautions...