Table of Contents
Advertisement
4
Press J or K to select the travel destination
time zone.
• If daylight saving time is in effect, press H to enable
daylight saving time function. W is displayed at the top of
the monitor and the camera clock is advanced one hour.
Press I to disable the daylight saving time.
• Press the k button to apply the travel destination time
zone.
• For other time zones, set the camera clock to local time
using the Date and time setting.
• While the travel destination time zone is selected, Z is
displayed in the monitor when the camera is in shooting
mode.
C
w Home Time Zone
• To switch to the home time zone, select w Home time zone in step 2, and then press the
k button.
• To change the home time zone, select w Home time zone in step 2, and then complete steps 3
and 4.
C
Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time function on or off from the
time zone selection screen displayed in step 4.
C
Imprinting Date on Images
Enable date imprint from the Print date option (E75) in the setup menu after the date and time
have been set. When the Print date option is enabled, images are saved with shooting date
imprinted on them.
E72
1 0 : 3 0
– 0 5 : 0 0
New York
Toronto
Lima
Back
Time zone
New York , Toronto, Lima
1 5 / 1 1 / 2 0 1 2 1 0 : 3 0
Home time zone
Travel destination
Advertisement
Table of Contents
