Coleman GALILEO 9276B141 Instructions

When You Are Ready
To Set Up Your Tent
– Select a level campsite clear of
rocks, branches and other hard
or sharp objects.
– Do not set up your tent under trees.
– For best results in windy conditions,
position the end of tent into the wind.
1 Layout & Positioning
of Tent, Pole Assembly
– Layout and position tent with doors
facing desired directions. (illus. 1)
– Unzip doors.
– Stake down tent, using the rings on the
stake loops. Keep the floor taut. (illus. 2)
– Assemble frame poles by interlocking
shock-corded poles. (three poles)
– Insert the longer black poles into pole
sleeves as shown below. They will
curve and come out on the same side
that they started. The shorter grey
side pole inserts into sleeves running
side to side. (illus. 1)
illus. 1
Grey side pole
Tent stake through ring on stake loop
GALILEO
Instructions apply to Part Number 9276B141
(2) Main Tent
Poles (Black)
(1) Side Pole
(4) Rainfly Poles
Assembled poles
inserted through
pole sleeves
Front door
illus. 2
™
14'x10'
POLE ASSEMBLY PARTS
Part No. 9276B202
Part No. 9276B203
(Grey)
Part No. 9276B204
Rainfly Part No. 9276B205
2 Connect Frame to Tent
– Insert one pin into the end of main tent
pole at tent corner. (illus. 3, illus. 4)
– Go to opposite end of pole and gradually
apply pressure to the pole forming an arch
until you are able to insert the pin into the
pole end. (works best with two people)
– Repeat for second pole.
– Insert pin into the end of side pole, go to
opposite end of pole and apply pressure
until you arch the pole and can insert the
pin into the pole. (illus. 3, illus. 4)
Grommets for
rainfly poles
illus. 3
Insert pin into pole end
illus. 4
Tent frame
set-up