Philips CL-1 Specification

Page 1 of 2
Position A
(5.1cm)
Position B
3-7/16"
(8.7cm)
Ordering Information
Style Lamps Lower Optics
CL08 T01
T01 = 1-Lamp T8 E = Solid Housing
Features
Housing: Die-formed 20 gauge cold-rolled steel painted white.
Weight :: 3.0 lb/ft.
Optical System: Constructed of highly specular Miro IV
reflective white 20 gauge steel to produce an asymmetric distribution.
Lamping: One T8 fluorescent lamp in cross section. 18 watt 2 foot,
32 watt 4 and 8 foot, 25 watt 3 and 6 foot lengths.
Mounting: Fixtures can be screwed down in multiple positions and orientations
to enable precise coordination of optical distributions.
Additional Information
Modules Lengths
Module Nominal Length
2ft 2'0"
3ft 3'0"
4ft 4'0"
6ft 6'0"
8ft 8'0"
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2010 Philips Group •
2"
22°
Upper Optics
E N
N = None 02 = 2 ft.
03 = 3 ft.
04 = 4 ft.
06 = 6 ft.
08 = 8 ft.
aluminum and highly
®
Peak Candel Angles
Mounting Peak
Position A 113˚
Position B 91˚
C1101
6" (15.2cm)
6-5/16" (16.0cm)
Length Wirirng
1 = 1 circuit
3 = 1 circuit w/
Emergency circuit
5 = 1 circuit w/
Battery Pack
7 = 1 circuit Dimming
Electrical
Factory pre-wired to section ends with quick-wire connectors.
Maximum ballast size is 1.3" (3.3cm) by 1.7" (4.3cm).
Standard dimming ballast is Advance Mark VII.
Labels
Certified to UL & CSA standards. Damp location.
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:

Lighting Systems

Covelite 1-Lamp T8
Voltage Ballast Color & Finish
E
D = Dual E = Standard W = High
Ballast
120v/277v
3 = 347v
Type:
CL-1
Half Scale
W
Reflective
White