Lightolier Calculite ProSpec PA3M1675 Specification

Page 1 of 2
14
Top View
14 3/8"
27 1/8"
9 3/8"
10
8
Flanged
Trimless
Ceiling Cutout: 16 1/16" L X 6 3/16" W
Ordering Information: MR 16 Series A
Cat. No.
PA3M167EBL
PA3M167EWL
PA3M167EBTL
PA3M167EWTL
Add a "1" for 120v or "2" for 277v at the
end of the catalog number for voltage
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge: Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of diecast aluminum.
3. Cross Blade Louver: Extruded aluminum. 1" deep, provides additional
shielding and can be easily removed.
4. Adjustable Ring: Allows 360° horizontal and 35° (on width) and 45° (on
length) vertical adjustment.
5. Tortiontite Spring: For easy installation of aperture frame.
6. Housing: Die formed 22 ga. steel. Finish: Black.
7. Mounting Brackets: Adjustable vertically from outside of housing.
8. Thermal Protector: Meets NEC, UL , and CSA requirements.
9. Lampholder: Steatite for GX/GY 5.3 Bi-Pin lamps. 250° C Teflon
10. Junction Box: 14 ga. steel, 4 x 3 1/2 x 2" box. Allows inspection from below.
11. Lamp and Accessory Support: .032" steel, flared for easy entry of Media
Cartridge.
12. Lens Retaining Ring: .093" spring steel rod. Holds accessories in place.
13. Lamp Guard: Heat resistant clear glass. Lamp manufacturers requirement.
14. Transformer Housing: Die formed 18 ga. steel.
Electrical
Electronic Transformers: Offer reliable operation and are accessible from
below for servicing. 12V Secondary 75 VA. each lamp.
Dimming Controls: Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound
when used with dimmers, which may be objectionable in acoustically
critical areas.
Electrical (continued)
Calculite ProSpec
®
6
18 3/8"
7
5
8 3/4"
Depth
PA3M167EBL = (Flanged) Black/White
PA3M167EWL = (Flanged) White
Add a "1" for 120v or "2" for 277v at the end of the catalog number for voltage
Lamp
(3) 75W MR 16*
(3) 75W MR 16*
(3) 75W MR 16*
(3) 75W MR 16*
*50W max. lamping when using accessories
leads.
®
Linear Downlight
®
24 3/8" L X 10" W
5" OC
5" OC
11
9
4
15" L X 5" W Opening
12, 13
1 2 3
PA3M167EBTL = (Trimless) Black
PA3M167EWTL = (Trimless) White
Ceiling Trim
Overlap
Overlap
Trimless
Trimless
UL/cUL listed for through branch circuit wiring with maximum of (8) no. 12 AWG,
90°C.
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories: 2 1/2" dia. series, filters, lenses, screens, and louvers. (2)
accessories maximum, including lamp cover glass. Lamp guard glass may be
replaced with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I B E W
Teflon is a registered trademark of E.I. DuPont.
®
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • D0711
PA3M1675
3 Light MR 16 Series A
Aperture Finish
Black with White Flange
White with White Flange
Black
White
Type:
www.lightolier.com