Cooling System - Ferrari F430 Owner's Manual

flows into the oil tank underneath. The
remaining gases, thanks to the vacuum
generated by the engine, are aspirated
through the connection pipes and conveyed
to the plenum chambers.
A dedicated pipe in the system releases the
pressure that accumulates in the oil tank.
Replacing the engine oil and filter
The oil and filter must be replaced at the
intervals indicated in the Service Time
Schedule at an Authorised Ferrari
Service Centre.
It is recommended to exclusively use
lubricants approved by Ferrari.
110

Cooling system

Centrifugal pump with thermostatic

valve
Right-hand radiator

Left-hand radiator

Electric fan

Bleeder pipe

4
5
7
2
3
Underfloor pipes

Twin contact fan on/off switch

Water temperature sensor

Oil/water heat exchanger

Expansion tank

6
1
4
10
9
8