Electrical Safety; Personal Safety - Chicago Electric 95380 Set Up And Operating Instructions Manual

Router table with router

Hide thumbs

Table Of Contents

Table of Contents

Grounded tools must be plugged into an outlet properly installed

and grounded in accordance with all codes and ordinances. Never

remove the grounding prong or modify the plug in any way. Do

not use any adapter plugs. Check with a qualified electrician if you

are in doubt as to whether the outlet is properly grounded. If the

tools should electrically malfunction or break down, grounding provides

a low resistance path to carry electricity away from the user.

Avoid body contact with grounded surfaces such as

pipes, radiators, ranges, and refrigerators. There is an

increased risk of electric shock if your body is grounded.

Do not expose power tools to rain or wet conditions. Water

entering power equipment will increase the risk of electric shock.

Do not abuse the Power Cord. Never use the Power Cord to pull

the Plug from an outlet. Keep the Power Cord away from heat, oil,

sharp edges, or moving parts. Replace damaged Power Cords

immediately. Damaged Power Cords increase the risk of electric shock.

Stay alert. Watch what you are doing, and use common sense when

operating the Router. Do not use the tool while tired or under the

influence of drugs, alcohol, or medication. A moment of inattention

while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long

hair. Keep your hair, clothing, and gloves away from moving parts.

Loose clothes, jewelry, or long hair can be caught in moving parts.

Use the right product for the job. Do not attempt to force small equipment

to do the work of larger industrial equipment. There are certain applications

for which this product was designed. It will do the job better and safer at

the rate and capacity for which it was designed. Do not modify this product,

and do not use this product for a purpose for which it was not designed.

Avoid accidental starting. Be sure the Power Switch is off before plugging

in. Plugging in power equipment with the Power Switch on, invites accidents.

Remove adjusting keys or wrenches before turning the

power tool on. A wrench or a key that is left attached to a

rotating part of the Router may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper

footing and balance enables better control of the Router in unexpected situations.

SKU 95380

For technical questions, please call 1-800-444-3353