Troubleshooting - Chicago Electric 95380 Set Up And Operating Instructions Manual

Problem
Router will not run.
Excessive vibration
when Router is on.
The Power Switch
of the Router and/
or Router Table does
not turn off the tool.
SKU 95380 For technical questions, please call 1-800-444-3353

TROUBLESHOOTING

1. Make sure the Power Switch of the Router Table is in its "ON" position.
2. Make sure the Power Switch of the Router is in its "ON" position.
3. Make sure the Power Cord of the Router is
connected to the Power Table's Outlet.
4. Make sure the Power Cord of the Router Table is connected
to a working, 110 volt, grounded, electrical outlet.
5. Check the Power Cords of the Router and Router Table for damage.
6. Carbon brushes need replacing.
7. Have a qualified service technician check the
Router and Router Table for defects.
1. Make sure the Router is properly and firmly attached to the Router Table.
2. Make sure the Bit in the Router is sharp and properly
installed. Make sure Bit is not bent or damaged.
3. Have a qualified service technician check the
Router and Router Table for defects.
Immediately unplug the Router Table's Power Cord from its
electrical outlet. Discontinue using tool until a qualified service
technician checks the Router and Router Table for defects.
Possible Solution
PAGE 14