Grounding - Duerkopp Adler 888 Instruction Manual

Hide thumbs Also See for 888:
Table of Contents

Advertisement

5.2

Grounding

The grounding conductor (1) is included in the accessory package
of the machine head.
Connect the conductor (1) to the plug (2) and pull its opposite end
under the table top.
Screw the opposite end of the grounding conductor to the relevant
grounding point of the drive (indicated
Attach the conductor with a clip on the bottom side of the table
top.
Caution!
Make sure that the grounding conductor does not touch the driving
V-belt (if there is any).
Note:
If the machine has the direct drive with the motor drive on the machine
head, it is not necessary to ground the head. In that case the head is
grounded with the motor on the head.
1
2
).
19
GB

Advertisement

Table of Contents
loading

Table of Contents