Frigidaire Oven Service Data Sheet

Frigidaire Oven Service Data Sheet

Hide thumbs Also See for Oven:

Advertisement

SERVICE DATA SHEET
Electric Double Wall Ovens with Electronic Oven Control
NOTICE
This service data sheet is intended for use by persons having electrical and mechanical training and a level of
knowledge of these subjects generally considered acceptable in the appliance repair trade. The manufacturer
cannot be responsible, nor assume any liability, for injury or damage of any kind arising from the use of
this data sheet.
SAFE SERVICING PRACTICES
To avoid the possibility of personal injury and/or property damage, it is important that safe servicing practices be
observed. The following are some, but not all, examples of safe practices.
1. Do not attempt a product repair if you have any doubts as to your ability to complete it in a safe and
satisfactory manner.
2. Before servicing or moving an appliance, remove power cord from electric outlet, trip circuit breaker to Off, or
remove fuse.
3. Never interfere with the proper installation of any safety device.
4. USE ONLY REPLACEMENT PARTS SPECIFIED FOR THIS APPLIANCE. SUBSTITUTIONS MAY DEFEAT
COMPLIANCE WITH SAFETY STANDARDS SET FOR HOME APPLIANCES.
5. GROUNDING: The standard color coding for safety ground wires is GREEN OR GREEN WITH YELLOW STRIPES.
Ground leads are not to be used as current carrying conductors. IT IS EXTREMELY IMPORTANT THAT THE
SERVICE TECHNICIAN REESTABLISH ALL SAFETY GROUNDS PRIOR TO COMPLETION OF SERVICE. FAILURE
TO DO SO WILL CREATE A POTENTIAL HAZARD.
6. Prior to returning the product to service, ensure that:
All electric connections are correct and secure.
All electrical leads are properly dressed and secured away from sharp edges, high-temperature
components, and moving parts.
All uninsulated electrical terminals, connectors, heaters, etc. are adequately spaced away from
all metal parts and panels.
• All safety grounds (both internal and external) are correctly and securely reassembled.
All panels are properly and securely reassembled.
318047306 (0509) Rev. A
1

Advertisement

Table of Contents
loading

Summary of Contents for Frigidaire Oven

  • Page 1 SERVICE DATA SHEET 318047306 (0509) Rev. A Electric Double Wall Ovens with Electronic Oven Control NOTICE This service data sheet is intended for use by persons having electrical and mechanical training and a level of knowledge of these subjects generally considered acceptable in the appliance repair trade. The manufacturer cannot be responsible, nor assume any liability, for injury or damage of any kind arising from the use of this data sheet.
  • Page 2: Electronic Oven Control (Eoc)

    ELECTRONIC OVEN CONTROL (EOC) 1. The EOC offers Bake, Broil, Preheat (some models), Speed Bake (some models), Convection Bake (some models) and Convection Roasting (some models) modes, Timed and Delayed Baking, and Cleaning functions. 2. Convection operates with an element and a fan dedicated to convection (some models). 3.
  • Page 3 ELECTRONIC OVEN CONTROL (continued) Electronic oven control display board J2 Keyboard connection. J5 Relays control outputs (bake & broil elements, light, P1 Micro programming (not used). MDL, conv. fan, DLB) for lower oven. P2 DC power input. P6 Temperature probe inputs. J3 Relays control outputs (bake &...
  • Page 4 ELECTRONIC OVEN CONTROL (FAULT CODES) ELECTRONIC OVEN CONTROL (EOC) FAULT CODE DESCRIPTIONS Note: Generally speaking “F1X” implies a control failure, “F3X” an oven probe problem, and “F9X” a latch motor problem. Suggested Corrective Action Failure Code/Condition/Cause - Check RTD sensor probe and replace if necessary. If oven is Control has sensed a potential runaway oven overheating, disconnect power.
  • Page 5: Electrical Rating

    RTD SCALE ELECTRICAL RATING Temp. °F Temp. °C Resistance (ohms) 27" 30" 32 ± 1.9 0.0 ± 1.1 1000 ± 4.0 KW rating 75 ± 2.5 23.9 ± 1.4 1091 ± 5.3 240/208 7.5/5.6 7.5/5.6 250 ± 4.4 121.1 ± 2.4 1453 ±...
  • Page 6: Fan Blade

    2 SPEED COOLING FAN The oven control controls the speed of the cooling fan. The cooling fan is activated at low speed during any cooking function. The high speed is activated during clean cycles only when the temperature is above approximately 575°F. EXPLODED VIEW OF CONVECTION OR SPEED BAKE SYSTEM (some models) Mounting Plate Fan motor assembly...
  • Page 7: Adjusting Oven Temperature

    CONVECTION OR SPEED BAKE MODE (some models) The convection or speed bake oven uses the addition of a fan to move the heated air already in the oven. Moving the heated air helps to destratify the heat and cause uniform heat distribution. Longer cooking times can be reduced by as much as 30%.
  • Page 8: Door Lock Mechanism

    DOOR LOCK MECHANISM The appliance is equipped with an electronic oven control and has an auto locking door latch feature. When the self clean cycle is programmed, the door is locked by a motor operated latch system. The interior of oven doesn't need to heat up to 500°F/260°C before the door locks.

Table of Contents