Chamberlain B/W Specifications

INSTA LLATION F OR E L2 000
CAMERA MODU LE M O DELS EL 2 00 0BW CAM KT ,
EL20 0 0CCAMKT AND EL 20 00 DVRCAMKT
1
Disconnect power to the unit.
2
To open, apply pressure to the right-side of the unit.
3
While maintaining pressure, turn the key clockwise.
4
Open the cover.
5
To remove the LED board, unplug the wire harness from LED
board and remove the screws (3). Do not remove the rubber
O-ring.
6
Replace black plastic lens with the clear lens. Keep rubber
O-ring in place.
7
Install the camera module. Reconnect the LED board wire
harness to the camera module.
8
Feed a coaxial cable (not provided) through the conduit hole
in the back mounting plate of the unit. Connect a BNC coaxial
connector to the back of the camera module.
9
Close and lock the unit.
10
Reconnect power to the unit.
If the EL2000 is connected to a home entertainment system,
NOTE:
the home entertainment system must be switched to video input.
BL ACK/ WHIT E , CO L OR
& L OW LUX COL OR
C AME RA MO DUL ES
FO R TH E EL25 & EL2000 TE LEP HONE
EN TR Y A C C ESS C O N TR O L SY STEMS
A static discharge can damage circuit boards.
2 3
5
LED Board
Wire Harness
7
8
4
6
Clear Plastic Lens
O-ring
Camera Module
BNC Coaxial Connector