About Your New Label Maker; Product Registration; Getting Started; Connecting The Power - Dymo LabelManager 220P User Manual

About Your New Label Maker

With the DYMO LabelManager 220P electronic label maker, you can create a wide
variety of high-quality, self-adhesive labels. You can choose to print your labels in
many different font sizes and styles. The label maker uses DYMO D1 tape cassettes
in widths of 6 mm, 9 mm, or 12 mm. These tape cassettes are available in a wide
range of colors.
Visit www.dymo.com for information on obtaining labels and accessories for your
label maker.

Product Registration

Visit www.dymo.com/registration to register
your label maker online.

Getting Started

Follow the instructions in this section to print your
first label.

Connecting the Power

The label maker is powered by standard batteries or an AC power adapter. To save
power, the label maker will automatically turn off after two minutes of inactivity.

Inserting the Batteries

The label maker uses six high-capacity AA alkaline batteries.
To insert the batteries
1. Slide the battery compartment cover away from the label maker. See Figure 2.
2. Insert the batteries following the polarity markings (+ and –).
3. Replace the cover.
Ç Remove the batteries if the label maker will not be used for a long time.
Figure 2
5