Setting The Picture Size - Sansui HDPDP5050 Owner's Manual

You can view 480i and 480p format
programs in a variety of picture
sizes—NATURAL, CINEMA
WIDE1, CINEMA WIDE2, CINEMA
WIDE3, and FULL.

Setting the picture size

Selecting the picture size
1
Press MENU. Press
select (SETUP) menu.
Press ▲ or ▼ to select
"PICTURE SIZE".
2
Press or . The PICTURE
SIZE menu will appear. Press
▲/ ▼ or a Number button (0-4)
to select the desired picture size,
as described below and on the
next page, then press ENTER.
3
Press EXIT to return to the normal screen.
NOTE:
You can also display the PICTURE SIZE menu by pressing the
16:9 button on the remote control.
NATURAL picture size
In some cases, this image will display the size of standard 4:3
with a gray side bar.
CINEMA WIDE1 picture size (for 4:3 format programs)
To fill the screen, the right and left edges are extended,
however; the center of the picture remains near its former ratio.
The top and bottom edges of the picture may be hidden.
or to
SETUP
CLOSED CAPTION
CC ADVANCED
PICTURE SIZE
PICTURE SCROLL
: SELECT
P I C T U R E S I Z E
0 . N AT U R A L
1 . C I N E M A W I D E 1
2 . C I N E M A W I D E 2
3 . C I N E M A W I D E 3
4 . F U L L
[ 0 - 4 ] : S E L E C T
OFF
: ADJUST
37