Sansui HDPDP5050 Owner's Manual page 18

Connections to other equipment
To connect the Plasma TV to a DTV receiver/set-top box
If you connect a DTV receiver/set-top box, connect your Plasma TV to a DTV receiver/set-top box using a
component video cord.
To connect an audio system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using
the Plasma TV's remote control.
To control the audio, turn on the Plasma TV and the stereo amplifier, and turn off the Plasma TV's built-in
speakers (see "Turning off the built-in speakers" on page 45).
VARIABLE AUDIO (L)
OUTPUT
VARIABLE AUDIO (R)
OUTPUT
NOTE:
To hear sound when using an external audio amplifier, the volume of both the Plasma TV and the amplifier
must be set above 0 (zero).
For example, if the volume of the Plasma TV is set to 0, you will not be able to hear any sound, even if the
volume of the amplifier is at its highest level.
18
Rear lower of the Plasma TV
To COMPONENT IN 1 (or 2)
Audio cord (not supplied)
Video cord (not supplied)
Rear lower of the Plasma TV
To Audio OUT
Y
P
B
P
R
To Component OUT
To Audio (L) Input
Audio cord (not supplied)
Amplifier
To Audio (R) Input