Preparing A Good Foundation For Your Portable Spa - Cal Spas LTR20051000 Owner's Manual

Preparing for Your New Portable Spa
In planning your spa's location, consider a location where the path to and from the house can be kept clean and
free of debris.
Allow For Service Access
Many people choose to install a decorative structure around their spa. If you are installing your spa with any
type of structure on the outside, such as a gazebo, remember to allow access for service. It is always best to
design special installations so that the spa can still be moved, or lifted off the ground.

Preparing a Good Foundation for Your Portable Spa

Your spa needs a solid and level foundation. The area that it sits on must be able to support the weight of the
spa and the occupants who use it. If the foundation is inadequate, it may shift or settle after the spa is in place,
causing stress that could damage your spa shell or finish.
Damage caused by inadequate or improper foundation support is not covered by the warranty. It is the
responsibility of the spa owner to provide a proper foundation for the spa. We strongly recommended
that you have a qualified, licensed contractor prepare the foundation for your spa.
Place the spa on an elevated foundation (preferably a 3" concrete slab). If you are installing the spa indoors, pay
close attention to the flooring beneath it. Choose flooring that won't be spoiled or stained.
If you are installing your spa on an elevated wood deck or other structure, consult a structural engineer or a
contractor to ensure the structure will support the weight of 150 pounds per square foot.
Your Cal Spas™ retailer can help you with your foundation and more. Your retailer has a wealth of information
and experience about how to get the most out of your spa and can provide you with a full line of accessories that
are designed to compliment your spa and increase your enjoyment.
2005 Spa Owner's Manual
Page 7
8/1/2005