In Case Of A Power Failure; During A Power Failure - Canon FAX-JX300 User Manual

In Case of a Power Failure

The user data settings and registered data for one-touch speed dialing and coded speed dialing are
saved during a power failure.
FAX-JX500/JX300 models:
Faxes or messages stored in the memory are backed up automatically if the power is tuned off or
fails. If however, the data cannot be retried when the power is tuned on again, a memory clear report
is printed automatically.
FAX-JX200/JX201 models:
A memory clear report is printed automatically when power is restored after a power failure. This
report includes a list of the documents that were stored in the memory at the time of power failure.

During a Power Failure

The following restrictions apply to the function of the fax during a power failure or while the
power is turned off:
You cannot use the fax to make telephone calls. Also if your fax is connected to a telephone,
you may not be able to make telephone calls.
You cannot send, receive, or copy documents.
You can receive voice calls only if a telephone, or an extension phone is connected to your fax.
Memory Clear Report (FAX-JX200/JX201 only)
If you experience a power failure, the documents in the fax memory will be lost.
As soon as power is restored to the fax, it will automatically print out a list of documents that
were stored in the memory at the time of the power failure.
Note
If the cartridge is empty or there is no paper in the Multi-Purpose Tray when power is restored, the
memory clear report will not be printed even after the cartridge is replaced or paper is loaded.
Troubleshooting 73